Configuring The Ssh Source Interface - Cisco Nexus 3600 NX-OS Security Configuration Manual

Configuring the SSH Source Interface

Procedure
Step 1
Step 2
Step 3
Step 4
The following example shows how to specify the SSH public keys in PEM-formatted public key certificate
form:
switch# copy tftp://10.10.1.1/cert.pem bootflash:cert.pem
switch# configure terminal
switch# show user-account
switch# copy running-config startup-config
Configuring the SSH Source Interface
You can configure SSH to use a specific interface.
Procedure
Step 1
Step 2
Step 3
Cisco Nexus 3600 NX-OS Security Configuration Guide, Release 7.x
64
Command or Action
switch# copy server-file bootflash:
filename
switch# configure terminal
switch# show user-account
switch# copy running-config
startup-config
Command or Action
switch# configure terminal
switch(config)# ip ssh source-interface
type slot/port
switch(config)# show ip ssh
source-interface
Configuring SSH and Telnet
Purpose
Downloads the file that contains the SSH key in
PEM-formatted Public Key Certificate form from a
server. The server can be FTP, SCP, SFTP, or TFTP
Enters global configuration move.
(Optional)
Displays the user account configuration.
(Optional)
Copies the running configuration to the startup
configuration.
Purpose
Enters global configuration move.
Configures the source interface for all SSH packets.
The following list contains the valid values for
interface.
• ethernet
• loopback
• mgmt
• port-channel
• vlan
Displays the configured SSH source interface.