Jupio PowerVault DSLR Operating Instructions

Jupio PowerVault DSLR
GB

Introduction

The Jupio PowerVault DSLR has a first class design and a high level of technical quality,
compatible with 95% of all USB powered products in the market. Two outputs allows for
fast charging. Its DC port can supply power for a DSLR camera and a video camera.

Specifications

Battery Cell – Polymer Cell
Capacity – 28 Wh
Input 1 – 5.0V/ 2A
Output 1 – 5.0V/ 2.1A
Output 2 – 7.2-8.4V/ 2A Max
Charging time – 5.0V/ 2A 4,5-5,0 hours
Cycle life - >500 times
Working temp - -10C - 40C
Storage temp - -10C - 40C
Size 110*70*18,3mm
Weight – 188g
Operating instructions
Always charge the PowerVault laying down instead of hanging on a wall power socket,
thus to prevent the powervault from falling.

Important safety instructions

Before using the powervault, please read and follow these rules
carefully
1. When using the powervault for the first time or using the powervault after long-
term storage, the powervault may have been gradually automatically discharged,
so the powervault can achieve its best performance after generally 5-6 complete
charges and discharges.
2. The powervault should be charged in a spacious environment, high or low
temperature can impact the batteries performance.
3. Don't put this product into water.
4. Don't throw, beat strongly or shake this product, otherwise it may damage the
internal parts and its whole structure.
5. Don't move the powervault close to fire or other sources of heat, in order to avoid
damaging the product.
© 2015 Jupio Europe BV – PO BOX 5105, 9700 GC, Groningen, The Netherlands.
www.jupio.com - v1.0