ENFORCER DP-266-CQ Manual

Wireless video door phone

Advertisement

Quick Links

ENFORCER Wireless Video Door Phone
Also Available from SECO-LARM
Additional Monitor
Additional Camera
DP-266-M3Q
2-Wire Color
Video Door Phone
Wireless Intercom
DP-222Q
IMPORTANT:
Users and installers of this product are responsible for ensuring this product complies with all national, state, and local
laws and statutes related to monitoring and recording audio and video signals. SECO-LARM will not be held responsible for the use of this
product in violation of any current laws or statutes.
FCC COMPLIANCE STATEMENT
DP-266-M3Q FCC ID: K4E266M3Q
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for one (1) year from the date of sale to the original customer. SECO-LARM's obligation is limited to the repair or
replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if
damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration,
improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment
is not operating properly as a result of causes other than defects in material and workmanship. The sole obligation of
SECO-LARM and the purchaser's exclusive remedy, shall be limited to the replacement or repair only, at SECO-LARM's
option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property
damage of any kind to the purchaser or anyone else.
NOTICE: The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM
reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints. All trademarks
are the property of SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2018 SECO-LARM U.S.A., Inc. All
rights reserved.
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Phone: (949) 261-2999 | (800) 662-0800
16
:
®
2-Wire Hands-Free
Video Door Phone
DP-266-CQ
DP-234Q
CBA
Wireless
®
Alert System
DP-T100-2Q
RA-4961-K1Q
DP-266-CQ FCC ID: K4E266CQ
Website: www.seco-larm.com
Email: sales@seco-larm.com
MI_DP-266-1C3Q_180628.docx
SECO-LARM U.S.A., Inc.
Wireless Video Door Phone
Features:
 Wireless operation – camera and monitor can
operate from up to 492ft (150m)** away
 Remotely and securely talk to visitors and
unlock doors or gates via the monitor
 Lightweight monitor can be carried around the
premises while talking to the visitor
 Connect up to two additional monitors and one
additional camera*
 Intercom calling between paired monitors*
 Camera has built-in IR LEDs for nighttime
operation
*Additional monitors and camera sold separately.
®
PICKN1
**Line-of-sight range. Actual range may vary depending on the installation and operating environment.
DP-266-1C3Q
Manual
 Camera includes a built-in PIR sensor that
activates the camera and takes photos of the
visitor when they approach
 Monitor includes a kickstand and a charging base
 Camera powered by 9~16 VAC/5~16 VDC
 Monitor front door at any time
 Egress input
 170° wide field of view
 Adjustable camera pan and tilt angle—up to 20°
from centerline in any direction—to allow for
mounting variations
®
*

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DP-266-CQ and is the answer not in the manual?

Questions and answers

Summary of Contents for ENFORCER DP-266-CQ

  • Page 1 ENFORCER Wireless Video Door Phone Also Available from SECO-LARM ® 2-Wire Hands-Free Additional Monitor Additional Camera Video Door Phone DP-266-1C3Q Wireless Video Door Phone DP-266-M3Q DP-266-CQ DP-234Q 2-Wire Color Wireless ® Manual Video Door Phone Wireless Intercom Alert System DP-222Q...
  • Page 2: Table Of Contents

    Introduction: d. Return the camera's battery and reconnect it to power. The ENFORCER Wireless Video Door Phone is a convenient and secure way to monitor and e. Insert each monitor's battery and reconnect each monitor to power. control an entryway, such as a door or gate, from up to 492 feet (150 meters) away.
  • Page 3: Specifications

    ENFORCER Wireless Video Door Phone ENFORCER Wireless Video Door Phone Specifications: Resetting the Camera and Pairing a First Monitor (continued): Camera Monitor 3. Reconnect the power wires and return the camera to the bracket. Type Color camera Display " (86mm) TFT 4.
  • Page 4: Display Overview

    ENFORCER Wireless Video Door Phone ENFORCER Wireless Video Door Phone Display Overview: Operating the Wireless Video Door Phone (continued): Communicating between monitors NOTE: The Wireless Video Door Phone system can be set up with up to 2 cameras and 3 monitors.
  • Page 5: Camera Wiring Diagram

    ENFORCER Wireless Video Door Phone ENFORCER Wireless Video Door Phone Camera Wiring Diagram: Operating the Wireless Video Door Phone: Communicating with the camera Request entry: Relay 1. Press the doorbell button on the camera. The indoor monitor will ring and display an image N.C.
  • Page 6: Installation - Camera

    ENFORCER Wireless Video Door Phone ENFORCER Wireless Video Door Phone Installation – Camera: Programming the Advanced Settings (continued): Unlocking duration: 1. Position the camera so the area to be monitored is easily visible, optimally 5ft (1.5m) above the ground. Do not position the camera in 1.
  • Page 7: Programming And Using The On-Screen Display

    ENFORCER Wireless Video Door Phone ENFORCER Wireless Video Door Phone Installation – Monitor (continued): Programming and Using the On-Screen Display (continued): Recharge the monitor battery: Programming the time and date: There are two ways to recharge the monitor battery. 1. While the monitor display is on, press the "Menu/Unlock" button to open the on-screen display.
  • Page 8: On-Screen Display Features

    ENFORCER Wireless Video Door Phone ENFORCER Wireless Video Door Phone On-Screen Display Features: Programming and Using the On-Screen Display: 1. While the monitor display is on, press the "Menu/Unlock" button to open the on-screen display. Photos – View and delete photos taken by the camera station. There are four different 2.

This manual is also suitable for:

Dp-266-m3q

Table of Contents