Delta Childrens Products 80010 Instructions For Use Manual
  1. Manuals
  2. Brands
  3. Delta Childrens Products Manuals
  4. Baby & Toddler Furniture
  5. 80010
  6. Instructions for use manual

Delta Childrens Products 80010 Instructions For Use Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
STYLE No: 80010
THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE.
If you have any questions or missing parts, contact us. DO NOT return product parts to the store
from where it was purchased before contacting Delta Children's Products Customer Service.
Make sure that all preassemble parts are tight. The appearance of your product may be different
from that pictured in this booklet.
To register your product for important safety alerts and updates to your product
please visit www.deltachildrensproducts.com
21558, APRIL 15, 2011, R3
READ ALL INSTRUCTIONS BEFORE
ASSEMBLY AND USE.
KEEP INSTRUCTIONS FOR FUTURE USE.
ADULT ASSEMBLY REQUIRED
DUE TO THE PRESENCE OF SMALL PARTS
DURING ASSEMBLY, KEEP OUT OF REACH OF
CHILDREN UNTIL ASSEMBLY IS COMPLETE.
Customer Service:
Web Site: www.deltachildrensproducts.com
Delta Children's Products
114 West 26th Street
New York, NY 10001
Tele.212-645-9033
COLOR
Conforms to
ASTM F1169-10a Full
Size Crib, F1821 & F2388
Safety Standards
A
REV
FTY
.
©2011 DELTA ENTERPRISE CORP.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 80010 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Delta Childrens Products 80010

Summary of Contents for Delta Childrens Products 80010

  • Page 1 114 West 26th Street New York, NY 10001 Tele.212-645-9033 STYLE No: 80010 COLOR THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE. If you have any questions or missing parts, contact us. DO NOT return product parts to the store from where it was purchased before contacting Delta Children’s Products Customer Service.

  • Page 2: Part

    CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27 1/4 INCHES BY 51 5/8 INCHES WITH A THICKNESS NOT EXCEEDING 6 INCHES. WARNING: CRIB Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding under an infant.

  • Page 3: Part

    TODDLER BED WARNING ENTRAPMENT/STRANGULATION HAZARD *INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT AND STRANGULATION. Failure to follow these warnings and the assembly instructions could result in serious injury or death. *Never use bed with children under 15 months. *Never place bed near windows where cords from blinds or drapes may strangle a child. *Do not place items with a string, cord, or ribbon around a child’s neck, such as hood strings or pacifier cords.
  • Page 4 PARTS: MAKE SURE THAT ALL PRE-ASSEMBLED PARTS ARE TIGHT. C. CHANGER BACK TOP RAIL x 1 PART # 21488 A. CHANGER B. CHANGER LEFT END x 1 RIGHT END x 1 D. CHANGER FRONT TOP RAIL x 1 PART # 21485 PART # 21487 PART # 21490 E.

  • Page 5: Table Of Contents

    PARTS: MAKE SURE THAT ALL PRE-ASSEMBLED PARTS ARE TIGHT. N. CHANGER TOP R. CHANGER SURFACE CENTER PANEL x 1 WITH STRAP x 1 S. CHANGER PAD x 1 PART # 21500 PART # 21496 PART # 21497 U. CRIB FRONT RAIL x 1 PART # 21481 P.
  • Page 6 PARTS: MAKE SURE THAT ALL PRE-ASSEMBLED PARTS ARE TIGHT. DD. DRAWER RIGHT SIDE PANEL x 2 PART # 21509 CC. DRAWER LEFT SIDE PANEL x 2 BB. DRAWER FRONT PART # 21508 PANEL x 2 PART # 21506 EE. DRAWER BACK PANEL x 2 GG.

  • Page 7: Part

    PARTS: CASTER WRENCH NOT SUPPLIED HH. MATTRESS SUPPORT x 1 PART # 21149 POUCH ATTACHED TO MATTRESS SUPPORT - KEEP INSTRUCTIONS IN THIS POUCH AFTER ASSEMBLY. WARNINGS RELATED TO THE SAFE USE OF THIS CRIB ARE PRINTED ON THE POUCH. PHILLIPS SCREWDRIVER NOT SUPPLIED WW.

  • Page 8: Part

    SECTION 1: CHANGING TABLE ASSEMBLY STEP 1 PARTS AND TOOLS REQUIRED TO COMPLETE STEP E. CHANGER MIDDLE RAIL x 2 D. CHANGER FRONT TOP RAIL x 1 C. CHANGER BACK TOP RAIL x 1 F. CHANGER BACK BOTTOM RAIL x 1 K.

  • Page 9: Part

    SECTION 1: CHANGING TABLE ASSEMBLY STEP 2 PARTS AND TOOLS REQUIRED TO COMPLETE STEP G. CHANGER FRONT TOP SHELF SUPPORT x 1 J. CHANGER CENTER TOP RAIL x 1 FROM STEP 1 LAY CHANGER LEFT END (PART A) ON IT’S SIDE AND LOOSELY INSERT (1) CHANGER FRONT TOP SHELF SUPPORT (PART G) AND (1) CHANGER CENTER TOP RAIL (PART J) AS SHOWN.

  • Page 10: Part

    SECTION 1: CHANGING TABLE ASSEMBLY STEP 3 PARTS AND TOOLS REQUIRED TO COMPLETE STEP M. CHANGER MIDDLE L. CHANGER MIDDLE BACK SHELF x 1 FRONT SHELF x 1 N. CHANGER TOP CENTER PANEL x 1 R. CHANGER SURFACE P. CHANGER BOTTOM FROM STEP 2 WITH STRAP x 1 CENTER PANEL x 1...

  • Page 11: Part

    SECTION 1: CHANGING TABLE ASSEMBLY STEP 4 PARTS AND TOOLS REQUIRED TO COMPLETE STEP KK. M6 x50 mm BOLT x 6 LL. M6 x35 mm BOLT x 1 B. CHANGER M4 ALLEN WRENCH FROM STEP 3 RIGHT END x 1 SUPPLIED CAREFULLY ALIGN ALL PANELS, TABS AND PINS WITH THE HOLES AND SLOTS IN THE CHANGER RIGHT END (PART B).

  • Page 12: Part

    SECTION 2: CRIB ASSEMBLY STEP 1 PARTS AND TOOLS REQUIRED TO COMPLETE STEP T. CRIB BACK RAIL x 1 M4 ALLEN WRENCH SUPPLIED PP. BARREL NUT x 4 FROM SECTION 1 STEP 4 JJ. M6 x75 mm BOLT x 4 W.

  • Page 13: Part

    SECTION 2: CRIB ASSEMBLY STEP 2 PARTS AND TOOLS REQUIRED TO COMPLETE STEP V. STABILIZER BAR x 1 M4 ALLEN WRENCH SUPPLIED NN. Φ4x30 mm METAL PIN x 4 PP. BARREL NUT x 2 FROM STEP 1 JJ. M6 x75 mm BOLT x 2 1.

  • Page 14: Part

    SECTION 2: CRIB ASSEMBLY STEP 3 PARTS AND TOOLS REQUIRED TO COMPLETE STEP FROM STEP 2 M4 ALLEN WRENCH SUPPLIED MM. M6 x15 mm BOLT x 4 HH. MATTRESS SUPPORT x 1 ATTACH THE MATTRESS SUPPORT (PART HH) IN ALL CORNERS USING (1) M6x15 mm BOLT (PART MM) IN EACH CORNER.
  • Page 15 SECTION 2: CRIB ASSEMBLY STEP 4 PARTS AND TOOLS REQUIRED TO COMPLETE STEP U. CRIB FRONT SIDE x 1 M4 ALLEN WRENCH SUPPLIED PP. BARREL NUT x 2 KK. M6 x50 mm BOLT x 2 FROM STEP 3 NN. Φ4x30 mm METAL PIN x 3 JJ.

  • Page 16: X. Hamper Front X

    SECTION 3: HAMPER ASSEMBLY STEP 1 PARTS AND TOOLS REQUIRED TO COMPLETE STEP RR. 16 mm SCREW x 1 PHILLIPS SCREWDRIVER Y. HAMPER BOTTOM x 1 X. HAMPER FRONT x 1 NOT SUPPLIED SLIDE HAMPER BOTTOM (PART Y) AGAINST THE HAMPER FRONT, SO THAT IT FITS SNUG UNDER AND OVER THE BARS AS SHOWN.

  • Page 17: Part

    SECTION 3: HAMPER ASSEMBLY STEP 2 PARTS AND TOOLS REQUIRED TO COMPLETE STEP RR. 16 mm SCREW x 10 PHILLIPS SCREWDRIVER NOT SUPPLIED Z. HAMPER SIDE x 2 FROM STEP 1 ATTACH (2) HAMPER SIDES (PART Z) TO THE ASSEMBLY FROM STEP 1 WITH (5) 16mm SCREWS (PART RR) FOR EACH.

  • Page 18: Aa. Hamper Back X

    SECTION 3: HAMPER ASSEMBLY STEP 3 PARTS AND TOOLS REQUIRED TO COMPLETE STEP RR. 16 mm SCREW x 9 PHILLIPS SCREWDRIVER NOT SUPPLIED AA. HAMPER BACK x 1 FROM STEP 2 ATTACH THE HAMPER BACK (PART AA) TO THE ASSEMBLY FROM STEP 2 WITH (9) 16mm SCREWS (PART RR).

  • Page 19: Part

    SECTION 3: HAMPER ASSEMBLY STEP 4 PARTS AND TOOLS REQUIRED TO COMPLETE STEP CASTER WRENCH WW. CASTER x 4 NOT SUPPLIED FROM STEP 3 ATTACH (4) CASTERS (PART WW) TO THE HAMPER BOTTOM IN THE THREADED HOLES. TIGHTEN WITH THE CASTER WRENCH.

  • Page 20: Part

    SECTION 3: HAMPER ASSEMBLY STEP 5 PARTS AND TOOLS REQUIRED TO COMPLETE STEP GG. HANDLE x 1 PHILLIPS SCREWDRIVER VV. HANDLE BOLT x 1 FROM STEP 4 NOT SUPPLIED ATTACH THE HANDLE (PART GG) TO THE ASSEMBLY FROM STEP 4 USING (1) HANDLE BOLT (PART VV). TIGHTEN WITH THE PHILLIPS SCREWDRIVER.
  • Page 21 SECTION 4: DRAWER ASSEMBLY STEP 1 PARTS AND TOOLS REQUIRED TO COMPLETE STEP CC. DRAWER LEFT SIDE PANEL x 2 SS. 25 mm SCREW x 8 BB. DRAWER FRONT PANEL x 2 DD. DRAWER RIGHT SIDE PHILLIPS SCREWDRIVER PANEL x 2 NOT SUPPLIED ATTACH (1) DRAWER LEFT SIDE PANEL (PART CC) AND (1) DRAWER RIGHT SIDE PANEL (PART DD) TO (1) DRAWER FRONT PANEL (PART BB) WITH (4) 25mm SCREWS (PART SS).

  • Page 22: Part

    SECTION 4: DRAWER ASSEMBLY STEP 2 PARTS AND TOOLS REQUIRED TO COMPLETE STEP FROM STEP 1 FF. DRAWER BOTTOM PANEL x 2 SLIDE (1) DRAWER BOTTOM PANEL (PART FF) IN THE GROOVES ON THE DRAWER LEFT SIDE PANEL AND DRAWER RIGHT SIDE PANEL, INTO THE GROOVE ON THE DRAWER FRONT PANEL. REPEAT ON THE OTHER DRAWER.
  • Page 23 SECTION 4: DRAWER ASSEMBLY STEP 3 PARTS AND TOOLS REQUIRED TO COMPLETE STEP TT. 35 mm SCREW x 8 UU. PLASTIC BARREL NUT x 8 EE. DRAWER BACK PHILLIPS SCREWDRIVER FROM STEP 2 PANEL x 2 NOT SUPPLIED ATTACH (1) DRAWER BACK PANEL (PART EE) TO THE ASSEMBLY FROM STEP 2 WITH (4) 35mm SCREWS (PART TT) AND (4) PLASTIC BARREL NUT (PART UU).

  • Page 24: Gg. Handle X

    SECTION 4: DRAWER ASSEMBLY STEP 4 PARTS AND TOOLS REQUIRED TO COMPLETE STEP GG. HANDLE x 2 PHILLIPS SCREWDRIVER VV. HANDLE BOLT x 2 FROM STEP 3 NOT SUPPLIED ATTACH (1) HANDLE (PART GG) TO THE ASSEMBLY FROM STEP 3 WITH (1) HANDLE BOLT (PART VV). TIGHTEN WITH THE PHILLIPS SCREWDRIVER.

  • Page 25: Part

    SECTION 5: HAMPER AND DRAWER ASSEMBLY PARTS AND TOOLS REQUIRED TO COMPLETE STEP INSERT THE HAMPER AND THE DRAWERS AS SHOWN. CHECK TO ENSURE ALL BOLTS ARE TIGHT.
  • Page 26 SECTION 6: CHANGING PAD ATTACHMENT AND USE STEP 1 PARTS AND TOOLS REQUIRED TO COMPLETE STEP M4 ALLEN WRENCH S. CHANGER PAD x 1 SUPPLIED 1. CHECK THAT THE BOLT SECURING THE STRAP IS TIGHT USING M4 ALLEN WRENCH. 2. INSERT THE STRAP THROUGH THE HOLE IN THE CHANGER PAD (PART S). 3.
  • Page 27 To register your product for important safety alerts and updates to your product please visit http://deltaenterprise.com/register.asp JANUARY 21, 2011, 80010-R0 ©2011 DELTA ENTERPRISE CORP. STORE THE ASSEMBLY INSTRUCTION BOOKLET IN THE POUCH ATTACHED TO THE MATTRESS...
  • Page 28 SECTION 7: TODDLER BED CONVERSION STEP 1 PARTS AND TOOLS REQUIRED TO COMPLETE STEP M4 ALLEN WRENCH SUPPLIED REMOVE THE (2) M6x75mm BOLTS (PART JJ), (2) BARREL NUTS (PART PP), (2) M6x50mm BOLTS (PART KK) AND (3) M4x30 METAL PINS (PART NN) INSTALLED IN SECTION 2 STEP 4 TO REMOVE THE CRIB FRONT SIDE (PART U) USING THE M4 ALLEN WRENCH.
  • Page 29 SECTION 7: TODDLER BED CONVERSION STEP 2 WARNING: SEE PAGE 3 FOR TODDLER BED WARNINGS THE MATTRESS SUPPORT MUST BE IN THE LOWEST POSITION. STORE ALL HARDWARE SAFELY. READ ALL WARNINGS ON PAGE 3 AS SHOWN, USE AS A DAY BED OR LOVE SEAT SOFA. DO NOT USE WITHOUT STABILIZER BAR INSTALLED.
  • Page 30 SECTION 8: FULL SIZE BED CONVERSION STEP 1 PARTS AND TOOLS REQUIRED TO COMPLETE STEP M4 ALLEN WRENCH SUPPLIED REMOVE THE POST FROM THE LEFT CHANGER END (PART A) BY REMOVING THE BOLTS. DISASSEMBLE THE CHANGER BY REVERSING SECTION 1. STORE ALL PARTS CAREFULLY FOR FUTURE USE, SEE PAGE 3 FOR INFORMATION.
  • Page 31 SECTION 8: FULL SIZE BED CONVERSION STEP 2 PARTS AND TOOLS REQUIRED TO COMPLETE STEP M4 ALLEN WRENCH SUPPLIED DISASSEMBLE THE CRIB END BY REMOVING THE PREASSEMBLED BOLTS WITH THE M4 ALLEN WRENCH. ATTACH THE POST REMOVED FROM THE CHANGER IN THE PREVIOUS STEP TO THE END OF THE CRIB BACK RAIL WHERE IT WAS PREVIOUSLY ATTACHED USING (2) M6x75mm BOLTS (PART JJ) AND (2) BARREL NUTS (PART PP).
  • Page 32 SECTION 8: FULL SIZE BED CONVERSION STEP 3 PARTS AND TOOLS REQUIRED TO COMPLETE STEP M4 ALLEN WRENCH SUPPLIED MM. M6 x15 mm BOLT x 4 FROM SECTION 8 STEP 2 ATTACH BED FRAME TO THE HEADBOARD (FROM SECTION 8 STEP 2) USING (4) M6x15mm BOLTS (PART MM).

  • Page 33: Part

    Consumer Care: www.deltachildrensproducts.com Delta Children’s Products 114 West 26th Street New York, NY 10001 Tele.212-645-9033 Warranty: This Delta Crib is warranted to be free from defects for a period of 1 year from the date of purchase under normal use. This warranty extends only to the original retail purchaser and is valid only when supplied with proof of purchase, or if received as a gift, when the registration is on file with Delta.

Table of Contents