DDpai Mix3 User Manual

材质：100g书 纸 两 面 印 刷
尺寸：132*80mm
CAUTION PACKAGE CONTENTS
Ÿ This device is designed to record video while the vehicle is in
operation. It can record ultra HD video even when there weren't
Image my world
streetlights around.
Ÿ Keep the windshield and lens clean for optimal video quality.
Ÿ Do not leave the device in vehicle without fixing firmly, fix device
onto a clean windscreen where the vision is not blocked. Don't
Dash Cam
install device on air bag or within its working range.
Ÿ Only use the power cable provided by the manufacturer. Other
power cable may cause short circuit, fire, or malfunction
Ÿ This device adopts build-in SD card, featuring in high efficiency,
stability, long use life. The memory card should be formatted via
App or PC regularly to maximize the lifetime of the memory card.
Installation Tool
Ÿ Do not adjust DDPAI Dash Cam or watch real time video via App
while driving.
Ÿ Do not install the product in a location where the product can
interfere with the driver's field of vision.
Improper battery replacement my cause explosion, use the
Ÿ
same type or battery to replace; Do not exposure battery (cell
battery or Li battery) in the sunlight or such extremely hot
User Manual
environment; Do not damage, puncture the battery or put it in the
fire, doing so may case explosion or toxic chemicals release.
Ÿ The product optimal temperature range (-20°C – 70°C/-4°F –
6 PRODUCT OVERVIEW
158°F), it provides high temperature protection function, it shuts
itself down to prevent any damages at very extreme
temperatures (working temperature range is 0°C-50°C/32°F – Lens
122°F when powered by battery).
Ÿ Do not disassemble or repair the product by yourself, contact
our service expert in case of any issue.
This Dash Cam can be used in other occasions despite in
Ÿ Power Button
vehicle, supply by power adapter.
Ÿ The contents of this manual are for reference only.
Parking Mode LED
User's Manual
6 USING THE DASH CAM VIA APP Video Playback 7 MANAGE FILES VIA SMART PHONE
Tap and left/right drag time line bar at the screen bottom to create
6.1 Download Emergency Files
6.1 Preview the starting point of the recording you wish to preview, then tap on
1. Connect your Dash Cam to App.
thumbnail when you have made your selection, or wait for 3 sec for
You can view in real-time the video currently being recorded by
buffering, now you can watch the history recording. 2. Tap on Camera, tap on
connecting your smart phone to the Dash Cam via direct Wi-Fi.
image or video files.
1) Open the DDPAI App, and add your Dash Cam.
Resolution Settings
2) Select Camera tap, then tap on button, this will bring you to 6.1 Editing and Sharing image/video files
Tap on FHD to set the video/ photo resolution, if the FHD icon is not
preview page. The photo filters integrated into the DDPAI Dash Cam App is
showing, tap on the video screen.
configured with 15 photo filters which can be applied to your photos.
1. Tap on the album icon
Download Image/Video Files
screen.
Tap on from preview screen to select image or video to download.
2. Select or tap on the photos you wish to edit.
For image files:
The emergency image and other image taken by Remote Snapshot
can be downloaded automatically by: Going into Me-> Settings, turn
on Auto Download Snapshot. However, image taken by Shutter
Button will be always downloaded automatically.
App 设置
For video files:
NOTE Drag timeline bar to create the starting point,
Ÿ The download speed is about the same as the video playback speed. The
video which is downloaded to the mobile phone is compressed, the HD video
T a p i t t o s t a r t d o w n l o a d T a p i t t o e n d d o w n l o a d
is stored on the build-in memory card.
Ÿ Emergency G-Sensor video storage to emergency file video.
Ÿ App will automatically download the video which was not completely
downloaded last time once connect to dash cam.
3. Once selected, at the bottom of the screen there will be an icon
HD video is in MP4 format and can be viewed in the computer.
Ÿ
that looks like a magic wand, this is the Modify icon.
6.2 Video Playback, Download video/images, etc. 4. Tap on the Modify icon to open the photo editor. This will activate
different photo filters.
Rotate your smart phone or press expand icon, turn preview
5. Select the photo filter you would like to apply by tapping on the
screen to landscape mode
filter, on this screen, you also can add Subtitles and Frame like
After downloading, you can share it on social media or delete it. movies.
7. Tap on save icon to apply. You can also share it on social media
by taping on Share the picture button.
Aspect ratio setting
Resolution setting
8 MANAGE FILES VIA PC
Download images/video
视频预览、回放、下载
1. Access memory card of your Dash Cam from PC with USB data
Time line bar
cable.
TIP: If the time line bar
NOTE 2. Double click on movable disk, open DCIM folder, there will be 4
not display, tap on video
Ÿ You can download maximum of 5 minutes length clip. folders under it:
S h u t t e r b u t t o n screen.
9 10
Wi-Fi Status
Working
Status LED
Control Button
IPS Screen
Power Cable
Toggle "Audio" to turn on/off audio recording.
Toggle "Snapshot" to capture photo during the video recording.
Reset MIC
Toggle "Album" to view photos and video clips.
Toggle "Setting" to enter setting screen, as shown in below.
Power Button: Press and hold for 2 seconds to turn the device
on/off. press one time to turn the IPS screen on/off while the Dash
Cam is working.
Car Charger
Parking Mode LED: Blinks slowly in parking mode. (solid on
indicates USB data transmission mode).
Working Status LED: Blinks slowly in normal working mode.
Ÿ Both LED are blinking quickly indicate memory card error.
Wi-Fi information
Ÿ Both LED are solid on indicate firmware upgrading.
3M Adhesive Mount with 3M Tape
View Dash Cam Wi-Fi information: turn on/off camera Wi-Fi.
Turn on: App can find and connect to camera Wi-Fi.
Controller Button
Control Buttons to navigate through user menu on the screen. Turn off: App can not find camera Wi-Fi.
Loudspeaker
Turn on: there will be voice guidance and alert/notification sounds.
Audio Record Back
Turn off: there will be no voice guidance and alert/notification
Snapshot Previous
Real Time Screen Menu Screen
Album Next sounds.
Setting OK Parking Monitoring
USB Port Turn on: When your car has been stationary for 15 minutes, Parking
Monitoring is automatically activated, stay on for the selected time
USING THE DASH CAM
Mount Connector duration (select from App: 15 minutes, 1H, 6H, 24H, or no shut
down), and automatically deactivated and switches back to
You can use/setup your Dash Cam via control buttons or DDPAI
continuous recording when there is a motion.
App.
Turn off: When your car has been stationary for 15 minutes, Dash
Control Button Cam will automatically shut off.
After connect and power on your Dash Cam, it will bring you to real-
NOTE
time screen. Here you can view recording status, current time, Wi-Fi
Ÿ An extra hardwire kit need to be installed; or, no need hardwire kit at all if
status, audio status, battery remaining. your car has an active cigar lighter (i.e. when car engine is off,the cigar
lighter still supply power)
Ÿ Select parking monitoring time duration and turn on/off parking monitoring
form App.
Video with Snapshot
Normal: The dash cam records in normal
20171019075657_78.mp4 When turned on, the Dash Cam captures a still image and a clip in
the 5 seconds prior to and subsequent to an snapshotting.
It continuously recording footage
200video at 1 frame per second, therefore
, then you can select the emergency Time-lapse: Date and Time Display
15 minutes of footage can be
S-20171019081231_2460_
reviewed in 30 seconds. The When turned on, There will be date and time display on the video and
30.MP4
camera activates and starts photo (as watermark) .
recording once detected motion.
Start up Sound
When motion is detected, it
Motion : Mute the Dash Cam by toggle it off.
saves a snapshot. L means there
located at the bottom middle of the G_20171013101728_0003
is a video related to this photo.
201photo Battery Protection for Parked Vehicles
Snapshot:
Photos taken by Snapshot Button Select a time duration, when your car has been stationary for 15
N_20171013101728_0003
or App snapshot. X means there
_X.jpg minutes, Parking Monitoring is automatically activated, stay on for
is no video related to this photo.
the selected time duration, and automatically deactivated and
202thumb Thumbnails are automatically switches back to continuous recording when there is a motion.
N_20171023134544_21_1
shown for event recording files.
G-Sensor Sensitivity
You can adjust the sensitivity of the motion detection so minor
8 SETTINGS motion caused by wind or rain doesn't trigger a snapshot. Automatic
snapshot operates in conjunction with the Dash Cam's inbuilt G-
1. Connect your Dash Cam with DDPAI App. Sensor. In order for this to work correctly, G-Sensor must be ON.
2. Tap on Me->Settings->Camera Settings.
9 FAQ
1. Video Recording
Q1: Shall I keep the dash cam connected with my phone when it is
working?
A: The Dash Cam starts to record videos automatically when the car
is started without needing to connect to your phone. However, if they
are connected, you can preview, download, and playback the videos
from the App on your phone.
Q2: Why some of the Dash Cam video recordings are missing.
A: Make use the App& firmware are the latest version. If there is
"Storage exception" notification means the SD card is corrupted and
11
need to be replaced.
Q3: Why image is not clear in my smart phone?
A: The video downloaded to your smart phone is compressed, you
can review HD recordings via PC in MP4 format.
Camera volume
Use the volume slider to adjust the Dash Cam volume. 2. Wi-Fi and App Connectivity
Q1: How to change the Wi-Fi name and password of the Dash Cam?
Microphone Recording
A: Make sure your Dash Cam is connect to App, then go into Me-
When turned off, the dash cam does not record audio.
>Settings->Camera Settings, tap on Camera Name to change your
Wi-Fi name, tap on Camera Password to change your Wi-Fi
password.
11 12 13
Battery Remaining
2. Align the mount with the connector, and slide it towards until it
Time-lapse Normal recording Time-lapse Auto Shutdown
record 15 min recording after X min/H clicks into place.
Audio 3.Remove the protective film from the back of the mount, attach the
adhesive side of the mount on the windshield where it has an
Snapshot If G-Sensor is triggered
unobstructed view of the road but does not interfere with the driver's
view. As shown below.
Album
Normal Normal recording Normal Auto Shutdown
Setting record 15 min recording after X min/H
If G-Sensor is triggered
After 60 sec stationary
Select "Real Time Screen", "Time Display Screen" or "Locked"
accordingly.
4.Adjust the angle of the lens by loosening the nut and rotating the
Format
camera. We recommend pointing the lens slightly downwards (≈10°
Format the build-in memory card. Back up any files you wish to keep
prior to formatting the SD card, as all footage will be deleted during below horizontal), so as to record video with a 6:4 road to
this process. Files downloaded to your phone will be visible through background ratio. Tight the nut after adjusting.
the App.
Download App
Scan the QR card to download DDPAI Dash Cam App to use more
feathers of the camera.
About
When the Dash Cam detects impact while working, it will
immediately store a clip 5 seconds prior and after the impact. The
10-second emergency recording is saved on the memory card under
the "202emergency" folder, file name begin with 'G' (after 10 clips 5. Use the installation tool to lift the edges of the windshield /molding
saved, the latest clip will replace the oldest clip).
and tuck in the power cable. Connect the Dash Cam to the car
charger (plugged into cigarette lighter socket) and power cable.
When the memory card fills up, the newest video files will start to
replace the oldest video files , called loop recording (saved in build-
in memory card in 1 minute segments), so you will always have the
most recent video files.
Tuck in cable
NOTE Ideal mount area
Dash Cam sensitivity can be adjusted via App.
5
Installation
5.1 Installing the Dash
1. Clean the area on the windshield where the Dash Cam will be
6. Turn on the engine after installation, your Dash Cam will power up
installed, otherwise it may fall off easily in later. and start recording. Working status LED blinks in normal mode.
6
Q2: WiFi is always disconnected? Q5: Why App cannot find Dash Cam Wi-Fi?
A: Go into Settings > Wi-Fi and hit the menu button, select
App cannot find Dash Cam Wi-Fi
Advanced, disable "Scanning always available" .
If "Scanning always available" checkbox is checked, make sure your
smart phone is near the Dash Cam.
Make sure your devices are not surrounded by too many Wi-Fi
networks. Dash Cam working
LED blinks in red
Q3: After connected with the Dash Cam Wi-Fi, why can't my Android
access it's mobile data.
A: Due to the settings of Android phones, mobile data is no longer Reset/ upgrade
available when it's connected to the Dash Cam Wi-Fi. Dash Cam, issue
Dash Cam is
solved
available in
Q4: Why cannot add camera/ adding camera failed? Settings-
>WLAN/Wi-Fi list
Cannot add camera/ adding camera failed
Reset/ upgrade
Dash Cam, issue
solved
Dash cam
working LED
blinks in red Return to
dealer
Enable App permissions from
Settings (sprocket) > Security
Just changed Reset/ upgrade and Privacy > Application
password Dash Cam, issue Permissions, issue solved
solved
Restart App,
issue sovled
Reset Dash
Cam to default
settings
Android: find dash cam from
App camera list, re-enter
Installed third party
password, add again iOS:
Return to App manager, find
Ignore dash cam Wi-Fi
dealer DDPAI and enable all
password from iPhone Wi-Fi
permissions, issue
list, enter new password and
solved
re-connect to dash cam Wi-
Fi.
incompatible,
return to dealer
End
End
14 15
5.2 Installing the App Camera
After connecting your phone with the DDPAI Dash Cam Wi-Fi, open
Search for the DDPAI the App, from here you can add/delete Dash Cam, and preview,
Install it on your
App in the Google Play
smart phone. playback, download, snapshot, cropping etc.
Store or Apple App
On the Road
DDPAI users community, it only need to connect to your smart phone
data or home Wi-Fi. From here you can find nearby users, see the
Tap the Allow button Accept App access to
newest activities, user experience, installation tutorial etc.
in the Authorization your smart phone.
Request
Sharing on Social Media
Taping on icon to share picture or video on social media like
Facebook, Twitter.
Launch App and Albums
explore more.
View images, videos and emergency clips, you also can edit and
share them from here.
NOTE
Ÿ This App is certified virus-free by Google Play Store and Apple App Store, it Me
does not contain malware, please list it in your trust application list. Hardware settings, updating and help center.
Ÿ We don't collect any kind of personal data, the information collected about
you only for register purposes.
5.4 Pair Smart Phone
Ÿ The DDPAI App is available for devices running Android 4.0 and up, iPhone 4
and up, or iOS 7.0 and up. 1. Launch App, tap on Camera, then tap on
Ÿ Some customized Android smart phones need to turn off mobile data(3G,4G)
to connect to Dash Cam via Wi-Fi, please be noted that the Dash Cam keeps
working without connecting to smart phone.
5.3 App Overview
Here is an overview of DDPAI Dash Cam App.
NOTE
2. Choose your DDPAI Dash Cam from the network list (For Android system, App
Camera LCD screen will be locked
will start to search Dash Cam network automatically. For iOS phone: turn on WALN
while App accessing. After exit App, it
from Settings > WLAN). The Dash Cam default SSID (or Wi-Fi name) begins with
will be unlocked automatically.
"vYou", ends with it's model (e.g. vYou_DDPai_mix3).
3. Enter the password (the default password '1234567890').
4. Click ADD CAMERA, wait a few seconds until the preview screen show.
NOTE
D i rect Wi-Fi will turn o n a u t o matica l l y w h e n t he D ash C am t ur n on.
7 8
1. Video Recording
11 SPECFICATIONS
Q:What if the mount loses it's stickiness?
A: Make sure that it is firmly installed for the first time, otherwise it
CPU: Hi3516E, H.265/H.264(default), 1080P@30fps
may fall off easily in later. If it falls off, clean the mounting area Image Sensor: 2MP low illumination CMOS sensor
before re-attaching it to the windshield with the spare 3M adhesive. Lens: 6 G-glasses, 140° wide angle, F1.8
Screen: 3 inch IPS screen
Wi-Fi Module: Wi-Fi/2.4GHz
Storage: Build-in eMMC high speed flash, loop recording
11 UPGRADE APP AND FIRMWARE
Video Output: Wireless video output, support Android/IOS device
G- Sensor: Built-in 3Gyo sensor, motion locking, adjustable sensitivity
via App
Video Resolution: 1920*1080 @30fps
11.1 Upgrade the Firmware via App
Photo Resolution: 1920*1080
RAM: 512Mb
Our App and camera firmware will be updated regularly, you can
update the firmware via App. Please follow these steps to upgrade
the DDPAI App and the latest firmware version onto the DDPAI Dash
Cam.
12 CUSTOMER SUPPORT
1. Open the Wi-Fi settings of your mobile device and connect to the
Dash Cam via Wi-Fi.
2. Once you are connected, launch the App. You will get a For customer support and firmware updates please visit
notification asking you to upgrade, accept to upgrade.
www.en.ddpai.com.
3. If you don't get the notification, you can tap on the Me in the lower You can also email a Customer Support expert at feedback@ddpai.com.
right corner of the App to manually upgrade.
Find us on Facebook, Instagram at ddpaisocialcarcam.
Or you also can contacts us on Facebook and WeChat by scanning below
Tap on see more to view more information about your Dash Cam. If QR Code:
an update is available, a New will appear. Tap on the New firmware
available to bring up the download page. If the App is the latest
vision, a notification of "Current version is the latest" will pop-out.
11.2 Upgrade the Firmware via PC
1. Access your Dash Cam via PC with USB data cable. Facebook WeChat
2. Download the latest firmware for your camera, unzip and copy the
content you have unzipped onto the build-in flash card.
3. Power on the camera and it will apply the firmware automatically.
NOTE
Ÿ Your Dash Cam's two LED indicator should blink during the upgrading.
Ÿ Once the dash cam is done upgrading it will tell you that "Upgrade success".
Do not power off your Dash Cam until it begins continuous recording as it may
cause permanent damage to the Dash Cam.
16