Auxiliary Functions And Machining Conditions; Interpolation And Feeds - Makino EDGE-2 Preinstallation Manual

2.5.6

Auxiliary Functions and Machining Conditions

Auxiliary
Functions
Machining
Conditions
2.5.7

Interpolation and Feeds

Interpolation
Feeds
Axis Motion
Overrides
02_20ed3a Specifications.fm
3UH,QVWDOODWLRQ*XLGH
Feature
Machining (M17/M18)
Work Tank Up/Down (M28/M29)
Selection: E4 digit (E0001 – E9999)
Registered area: 600
Feature
Rapid Positioning – Manual G0
Linear Interpolation – Manual G1
Circular Interpolation – G2 (CW), G3 (CCW)
Taper Interpolation – G51 (left), G52 (right), G50(can-
cel)
Taper Corner Tangential Interpolation – G24
Spiral Interpolation – G25
Taper Top/Bottom Same Radius – G49
Vertical Irregular Shape Interpolation – G41/G42 P0,
P1, P2
Servo Feed by Machining Condition Setting
F4 Digit Traverse
Rapid Feed
Jog Feed (High, Middle Low)
Step Feed (Least Input Increment ×1, ×10
Incremental Feed
Dwell – G4
Automatic Acceleration/Deceleration
Override Cancel
F4 Digit Feed Override 0 – 200%
('*(
Detail
Detail
2 - 21