Table of Contents
Advertisement
6.3
ConstruCam 3D
6.3.1 Installation
The software ConstruCAM 3D is a comprehensive CAD / CAM program. It works seamlessly with
the software WinPCNC.
ConstruCAM is available to download on our website.
https://www.cnc-step.de/wp-content/uploads/ConstruCam3D_Eco.zip
Save the download to your computer and unzip the archive file in any folder.
The software does not have to be installed. To unlock the software you will get the necessary
instructions and the license code from us.
For preconfigured computers of course this has already happened!
6.3.2 Milling program generation with KinetiC -NC
After completing the drawing, the milling program must be generated in ConstruCam3D and
exported for KinetiC-NC.
To do this, the Directmill output must be set up.
Attention: ConstruCam3D now overwrites this file with every export (by clicking the DirectMill
button). This can now be opened in KinetiC-NC.
Tip: You can copy and rename this file for later use. However, the export file created above must
not be deleted or moved.
CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
Click the DirectMill button with the middle mouse
button and select KinetiC-NC.
Specify the desired location and select a filename.
Quick Start Guide
High-Z Series
Page 22
27.09.2013
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the High-Z Series and is the answer not in the manual?
Questions and answers