Motorola C24 CDMA 1X Hardware Interface Manual page 15

Applicant: Motorola, INC
Sleep
Module
Idle
Disabled
CTS_N
Enabled
TXD_N or
RXD_N
2.4.3.2
The module low power mode is enabled and disabled by the ATS24 command.
To permanently terminate the low power mode, the ATS24 = 0 command must be used. Setting ATS24 =
0 disables the currently active low power mode and switches the module to Idle mode.
The module will not return to low power mode until an ATS24 > 0 commands is set again.
ATS24
Permanent termination of Low Power Mode
Motorola General Business Use
Page 15 of 36
FCC ID: IHDP56JE1
C24 Hardware Interface Manual
Version 0.3