Whelen Engineering Company Super-LED FDCT10BR Installation Manual

ENGINEERING COMPANY INC.
51 Winthrop Road,
Chester, Connecticut 06412-0684
Phone: (860) 526-9504
Fax: (860) 526-4078
Installation / 2011 Tahoe:
1. This installation can be done by going under the front bumper to
access the fog lights. If you have difficulty gaining access to the fog
©2011 Whelen Engineering Company Inc.
Form No.14515 (071411)
ENGINEERING COMPANY INC.
51 Winthrop Road,
Chester, Connecticut 06412-0684
Phone: (860) 526-9504
Fax: (860) 526-4078
Installation / 2011 Tahoe:
1. This installation can be done by going under the front bumper to
access the fog lights. If you have difficulty gaining access to the fog
©2011 Whelen Engineering Company Inc.
Form No.14515 (071411)
®
Models FDCT10BR, FDCT10RR, FDCT10JR
Internet: www.whelen.com
Sales e-mail: autosale@whelen.com
Canadian Sales e-mail: Canadiansales@whelen.com
Customer Service e-mail: custserv@whelen.com
lights this way, you may also remove the 3 christmas tree fasteners
and 2 screws toward the front of the wheel well that hold the wheel
shroud on and peel the shroud back.
2. Unplug the existing fog light from the wiring harness, remove the
mounting hardware and remove the fog light from the vehicle. If the
vehicle is not equipped with fog lights remove the rubber plug from
this location. The plug is removed by pinching together the retaining
clips protruding from the back to disengage the plug allowing it to be
pushed out towards the front of the vehicle.
3. Insert the LED Driving/Warning light into the hole the existing light
occupied.
4. Mount the LED Driving/Warning light into the 2 slots the existing light
mounted to (Fig. 1). Secure the Driving/Warning light using the
supplied mounting hardware.
5. Connect the wires to the Driving/Warning light wiring then replace
the fasteners and screws if you removed them in step 1.
Follow these wire designations to connect the lighthead wires:
WIRE.............................................................................................Function
LED Color ..........................................................+VBAT for Warning Lights
WHITE ..................................................................+VBAT for Driving Lights
BLACK ....................................................................................... Ground (-)
WHT/VIO................................................................................. Scan-Lock™
For warranty information regarding this product, visit www.whelen.com/warranty
®
Models FDCT10BR, FDCT10RR, FDCT10JR
Internet: www.whelen.com
Sales e-mail: autosale@whelen.com
Canadian Sales e-mail: Canadiansales@whelen.com
Customer Service e-mail: custserv@whelen.com
lights this way, you may also remove the 3 christmas tree fasteners
and 2 screws toward the front of the wheel well that hold the wheel
shroud on and peel the shroud back.
2. Unplug the existing fog light from the wiring harness, remove the
mounting hardware and remove the fog light from the vehicle. If the
vehicle is not equipped with fog lights remove the rubber plug from
this location. The plug is removed by pinching together the retaining
clips protruding from the back to disengage the plug allowing it to be
pushed out towards the front of the vehicle.
3. Insert the LED Driving/Warning light into the hole the existing light
occupied.
4. Mount the LED Driving/Warning light into the 2 slots the existing light
mounted to (Fig. 1). Secure the Driving/Warning light using the
supplied mounting hardware.
5. Connect the wires to the Driving/Warning light wiring then replace
the fasteners and screws if you removed them in step 1.
Follow these wire designations to connect the lighthead wires:
WIRE.............................................................................................Function
LED Color ..........................................................+VBAT for Warning Lights
WHITE ..................................................................+VBAT for Driving Lights
BLACK ....................................................................................... Ground (-)
WHT/VIO................................................................................. Scan-Lock™
Page 1
For warranty information regarding this product, visit www.whelen.com/warranty
Installation Guide:
Super-LED® Driving/Warning Light
2011 Chevrolet Tahoe
Installation Guide:
Super-LED® Driving/Warning Light
2011 Chevrolet Tahoe