Removing the air filter unit
First, remove the standard air filter unit attached to the projector.
Air filter cover fixing screw
Air filter cover
Fig. 1
Grip on the air filter unit (a)
Grip on the air filter unit (b)
1)
Turn off the power of the projector, and disconnect the power plug
from the outlet.
f Make sure to follow the procedure in "Switching off the projector"
described in the Operating Instructions of the projector when turning
off the power.
2)
Remove the air filter cover.
f Use a Phillips screwdriver to turn the air filter cover fixing screw
counterclockwise until it turns freely (Fig. 1), and open the air filter
cover for approximately 90°, and then pull out in the direction of the
arrow. (Fig. 2)
f Loosen the air filter cover fixing screw while holding the air filter cover
with your hand.
6 - ENGLISH
Attaching the Long Life Filter Unit
Tabs on the
projector body (c)
Fig. 4
Fig. 2
Air filter unit compartment and
the projector's air intake port
Air filter unit
Tabs on the projector body (d)
Fig. 3
Fig. 5