Appendix B: Wiring Diagram Dodge: 2003 To 2006 Chevy: 2001 - 2006 - CM Truck Beds SS Truck Bed Installation Manual

Appendix B: Wiring Diagram Dodge: 2003 to 2006
Explanation
* NOTE: Observe all vehicle manufacturer recommendations when working with or connecting to vehicle
electrical systems. These wiring instructions were created for trucks using separate brake and turn signal
lights. Keep all lights turned off when making connections.
The wiring is installed starting on the right side of the headache rack, running through it and picking up the left side.
It then travels back to the center of the bed where there is a 6 pin connection. The center harness is connected
here and runs back to the tail skirt where there is another 6 pin connection for the rear skirt harness. Before the
rear connection is a 6 wire pig tail to tie directly into the truck functions.
* NOTE: Wires that are not used from harness need to have a heat shrink butt connector put on the end so
they don't short out against the steel of the truck bed.
Chevy: 2001 - 2006
22