The Servicing Interval Has Been Exceeded; Resetting The Service Indicator; Retrieving The Service Information - PEUGEOT 301 Handbook

Instruments
The servicing interval has been
exceeded
For 5 seconds after the ignition is switched on,
the spanner flashes to indicate that the service
must be carried out as soon as possible.
Example: the service is overdue by 186 miles
(300 km).
For 5 seconds after the ignition is switched on,
the screen indicates:
5 seconds after the ignition is switched on,
the total distance recorder resumes its normal
operation. The spanner remains on.
For BlueHDi Diesel versions, this alert
is also accompanied by the continuous
illumination of the Service warning light
when the ignition is switched on.
26

Resetting the service indicator

After each service, the service indicator must
be reset to zero.
To do so, follow this procedure:
F Switch off the ignition.
F Press the trip distance recorder reset
button and keep it pressed.
F Switch on the ignition; the distance
recorder display begins a countdown.
F When the display indicates =0, release the
button; the spanner disappears.
Following this step, if you wish to
disconnect the battery, lock the vehicle
and wait at least five minutes for the reset
to be taken into account.
Retrieving the service
information
You can access the service information at any
time.
F Press the trip distance recorder reset
button. The service information is
displayed for a few seconds, then
disappears.
The remaining mileage may be weighted
by time according to the driver's driving
habits.
The spanner may therefore also come
on if you have exceeded the period
since the last service, as indicated in the
manufacturer's service schedule.
For BlueHDi Diesel versions, the spanner
may also come on early, depending on the
degree of deterioration of the engine oil
(depending on the country of sale).
The degree of deterioration of the engine
oil depends on the driving conditions in
which the vehicle is used.