Hitachi GVX-CC64GxBX series User Manual page 167

【Error Message】
No. Error messages
Actions to be taken
1 parameter error
Confirm command syntax.
another F/W update process is
running.
Confirm whether other FLASH-ROM update, backup commands or FW online
update command has finished and retry command.
2 xxx : ioctl(xxx) error.(xxx)
xxx : ioctl_diag(xxx) error.(xxx)
Wait for a while and retry command.
If the same error is displayed when executing command again, please contact
maintenance personel or support service.
3 xxx: flash read error (xxx)
Wait for a while and retry command.
If the same error is displayed when executing command again, please contact
maintenance personel or support service.
4 adapter status error.
Confirm the adapter status. Adapter status may be the following.
- H/W in the specified Core is MCK, F-STOP or CHK-STOP status.
- Operational status of FW in the specified Core is not Normal.
- The specified adapter is isolated.
5 already update.
The adapter is already operating on the FW version stored in FLASH-ROM.
Check FLASH-ROM version and FW version currently operating on the HW
reffering the section 'Online update of the firmware' .
6 update proccess is reserved.
Check FLASH-ROM version and FW version currently operating on the HW
reffering the section 'Online update of the firmware' .
7 unsupport F/W error.
Reboot the server for FLASH-ROM to take effect.
8 inapplicable – FW error.
Inapplicable – HW error.
Reboot the server for FLASH-ROM to take effect.
9 adapter busy error try again later.
other port(s) busy.(xxx)
Please execute it again after
waiting for the end of other HBA
tools.
Wait for a while and retry command.
If the same error is displayed when executing command again, please contact
maintenance personel or support service.
10 xxx is unsupport for FPP.
Reboot the server for FLASH-ROM to take effect.
11 not found update file
Confirm the update fil nane and file path.
12 update file read error.
update file access error.
update file open error.
Confirm the attributes of update file.
13 Update file size error.
Specified update file size is not correct. Confirm whether the update file is
transferred using binary mode.
Input command syntax error
Other process is executing FLASH-ROM
update, backup or Onine-update.
ioctl error
FLASH read error
Online update is not applicable to the
adapter.
F/W has already been updated.
F/W has already been reserved for online
update.
(Waiting for FW to be idle state)
This FW is not covered by online update.
This FW is not covered by online update.
Adapter is busy.
This HW is not covered by online update
Failed to find update file.
Failed to access update file.
Update file size is not correct.
146