Other Settings; Changing The Network Name (Ssid) And Password - juwel HeliaLux SmartControl Instruction Manual

Other settings

Changing the network name (SSID) and password

Please proceed as follows to configure the network name and password:
1. Connect to the HeliaLux SmartControl's user interface.
Via AP mode, please refer to ' Establishing a connection to the user interface via
•
Access Point Mode ' .
Via the home network, please refer to ' HeliaLux SmartControl in home networks ' .
•
2. Select the main ' Settings ' menu item.
3. Navigate to the ' HeliaLux SmartControl network ' item.
Important
Please ensure that the ' Connect to home network ' sliding controller has been disabled.
4. Assign a new unique network name to your HeliaLux SmartControl in the ' Network
name (SSID)' input field.
Notice
Network names (SSID) may not contain any spaces, special characters or
umlauts.
5. Create a new secure Wi-Fi password for your HeliaLux SmartControl in the ' Wi-Fi
password ' input field.
Info
Secure passwords contain at least 8 characters and use uppercase and lowercase letters,
digits and special characters.
6. Click the ' Save ' button to confirm your choice. Your device will reboot.
7. Establish the connection to your SmartControl's newly created Wi-Fi network (please
refer to 'Establishing a connection to the user interface using Access Point Mode').
17