Sanyo DIR-2000 Owner's Manual page 10

Using the Remote Control (Continued)
13 TV Mode Key—Press to select the operating mode for your TV.
Must be programmed. Refer to "Quick 'N Easy" Startup Guide.
DVD Mode Key—Press to select the operating mode for your
14
DVD. Must be programmed. Refer to "Quick 'N Easy" Startup
Guide.
Reset Key—Press twice to restore all customer adjustable
15
controls to the original factory settings. A display warning
will appear. Press again to begin channel search procedure.
16
Volume (VOL) + + Up/ – – Down Keys—Use the + + / – – keys to
adjust the sound level on your TV.
CH (Channel) Map Key—Press this key to display the channel
17
map page. The map page will display either DTV digital chan-
nels or NTSC analog channels (cable or VHF/UHF). Currently
selected channel number will be highlighted in yellow. Deleted
channels will be blue.
Audio Key—Press to select the desired audio reception feature
18
options (if available) for DTV: Main, Sub-1, Sub-2, Sub-3 etc.,
or for NTSC: Stereo, Mono, and SAP. This key will only operate
the SDB.
Recall Key—Use this key to alternate between two channels. It
19
will select the previous channel on your SDB as well as your TV
and VCR. This key functions differently on the DVD, it selects
the repeat function.
Cursor Keys—Use these keys to scan channels, as directional
20
arrows to highlight features and options, and to navigate through
the menu.
The Cursor Up/Down keys move the cursor up and down within
the SDB menu, and selects next channel up and down on the
SDB, TV, and VCR. Using the Cursor Up/Down keys in DVD
mode activates the next/previous or skip forward/reverse
function.
The Cursor Left/Right keys move the cursor left and right within
the SDB menu. Use the Cursor Left key to delete or undo any
numeric entry. The Left/Right keys operate only the SDB.
21
Display Key—Use this key to show the full channel and time
banner display for the SDB, VCR, and DVD mode. Pressing this
key in the TV mode will display the Channel Number.
Sleep Key—Use this key with the "0" key to set the Sleep Timer
22
on a Sanyo TV. It does not function in any other mode.
V-Guide Key—Use to access the parental control restrictions for
23
viewing movies and TV programs. (Reference page 20 for detail
operation.)
10
VCR/DVD Keys—Use these keys to operate your VCR and
24
DVD. Remember the remote control must be programmed first.
Rewind – Fast rewinds VCR tape, and fast skip reverse
for DVD.
Play – Selects play mode.
Fast Forward – Fast forward VCR tape, and fast skip
forward for DVD.
Record – Selects recording mode for VCR only.
Stop – Selects stop mode.
Pause – Select pause mode.
Tracking / – Adjusts VCR head tracking, and still
frame step forward or reverse for DVD.
13
14
15
16
17
18
19
20
21
22
23
24