Checking The Package Contents - Sanyo CLT-OHE40 Instruction Manual

2.4 ghz expansion cordless handset with charging cradle
Table of Contents

Advertisement

UU438DH_ENG.fm Page 2 Monday, June 13, 2005 7:00 PM
Welcome
Congratulations on your purchase of the SANYO CLT-OHE40 handset and
charger. This expansion handset is for use with the CLT-E40/42. Each
main base model in this series can support up to four handsets. You
can place a fully-featured cordless handset anywhere as long as there
is AC power to connect the handset charging cradle.
IMPORTANT
The CLT-OHE40 expansion handset will not operate unless it has been
registered to your main base. This manual describes how to set up
and connect your new handset; for instructions on operating your
new handset, refer to the owner's manual supplied with your main
base.
Backward / Forward Compatibility
Your phone is compatible with SANYO CLT-E23 and CLT-E30/32/33 2.4
GHz Digital Expandable Systems.

Checking the Package Contents

Make sure you have received the following items in the package.
• Cordless Handset
• Charging Cradle
• Battery Pack (BT-0001) (pre-installed)
(Capacity: 650 mAh, 3.7V)
• AC Adapter (AD-708)
(INPUT: 120V AC 60Hz) (OUTPUT: 9V DC 210 mA)
• Audio Recording Cable
• Holster
• This Owner's Manual
• Other Printed Material
E2

Advertisement

Table of Contents
loading

Table of Contents