Related Manuals for Sanyo DC-DA1465M
Summary of Contents for Sanyo DC-DA1465M
-
Page 1: Instruction Manual
INSTRUCTION MANUAL Micro Component System 1465AUfcover.indd 1465AUfcover.indd DC-DA1465M 2008-7-28 2008-7-28 10:00:58 10:00:58... - Page 2 CAUTION USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THIS PRODUCT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED PERSONNEL. The apparatus shall not be exposed to dripping or splashing. Do not use where there are extremes of temperature (below 5 °C or exceeding 35 °C) or where direct sunlight may strike it.
- Page 3 BACK R ch speaker Black FM aerial Note: Do not connect the mains lead to an AC outlet until all connections have been made. The system is not completely disconnected from the AC power when the z/ON button is set to the z (standby) position. Speakers Connect the red speaker wire to the red terminal (+) and the other wire to the black terminal (-) .
-
Page 4: Remote Controller
REMOTE CONTROLLER 1465AUEnglish.indd 1465AUEnglish.indd CONTROLS 1. Line in socket (LINE IN) 2. Stop button (STOP n ) 3. Skip/Search/File select/Tuning button (- TUN/FILE +, f , e) 4. Band select button (BAND) 5. Folder/Channel select button (FOLDER/CHANNEL) 6. Function button (FUNCTION) 7. -
Page 5: Inserting Batteries
Inserting batteries Note: Always remove battery if the remote control is not to be used for a month or more. Battery within the unit may leak and cause damage. Two R03/AAA batteries (not supplied) ADJUSTING THE CLOCK When the unit is fi rst connected to the AC power line, the display blinks “00:00”... -
Page 6: Before Operation
This instruction manual explains the various functions of this unit using the remote control. The buttons on the main unit perform similar functions to similary marked buttons on the remote control. Turning the power on and off Press the z/STANDBY button to turn on the power, the display lights up and “HELLO”... -
Page 7: Mp3/Wma Cd Operation
Repeat / Random play Press the PLAY MODE button repeatedly before or during play to select various play modes available. Each time the button is pressed, the play mode changes as shown below: “ ”appears “ ALL” appears (Repeat one track) (Repeat all tracks) Released “... -
Page 8: Basic Playback
Limitations on the display Available letters for display are the following: capital alphabets of A through Z, numbers of 0 through 9, and _ (underline). MP3 CD directory sample: Play order: song01 v song02 v ... v song14 MP3 CD Folder number F01 There is no MP3 file. -
Page 9: Listening To Tape
1. Press the FUNCTION button to select “TAPE” function. “TAPE” appears. 2. Pull the OPEN A portion to open the cassette button cover. 3. Press the N / Q button to open the cassette holder. 4. Load the cassette. After loading the cassette, push the cassette holder back into position. -
Page 10: Timer Operation
Recording copyright material without permission of the copyright owners is usually an infringement. If you wish to re-record copyright material, permission from the copyright owner is necessary. SANYO does not approve of, and cannot be held responsible for, any unlawful use of this machine. -
Page 11: Maintenance
Cleaning the tape heads To ensure continued high performance, use cotton swab to clean the heads, pinch roller and capstan of the decks after about every 10 hours of use. If the dirt persists, soak the swab in a little methylated spirit or head cleaning fl... -
Page 12: Specification
9 cm cone type Maximum power-handling capacity: Nominal impedance: 4 ohms Dimensions: 140(W) x 225(H) x 180(D) mm Weight: Approx. 1.3 kg (per speaker) Specifi cations subject to change without notice. SANYO Electric Co.,Ltd. Printed in China 2008-8-6 2008-8-6 9:53:19 9:53:19...