Advertisement
Data Acquisition System
Features
• Device-related information such as
temperature, CO
and O
concentration,
2
2
and operating condition can be
integratedly monitored with one LAN-
connected personal computer.
Items that can be monitored depend on the
connected devices.
• Operating records are stored in
sequence in the PC. It is unnecessary to
fill in paper records or to enter in a
record book. It is easy to convert the
data into a graph.
Please note that there is a case in which data must
be recorded on a paper.
• Devices can be set up remotely from a
distant point, which saves entering a
clean room.
When the operating setting can be changed through
the network, it is impossible to change the
operation setting on the panel of each device.
Main functions
Map Display
Conditions of biomedical devices can be
displayed on the map intelligibly. (A device
showing a warning is displayed in red.)
Graph Display
Condition change of a selected channel can be
displayed on a graph.
SANYO Electric Co., Ltd., Biomedical Division, Gunma is certified for:
Quality management system: ISO9001 / Medical devices quality management system: ISO13485 / Environmental management system: ISO14001
Distributed by:
• Setting the upper/lower limits will cause
you to be informed of an abnormality by
e-mail if the data is out of the range, and
you will also be informed when the
system recovers from the abnormality.
In addition, the system can be set so
that the device conditions will be
informed at a designated time whether
or not there is an abnormality.
A mail account which can be connected to an
SMTP-compatible mail server is required.
• Two-step/day operation to set up two
different temperatures is
programmable.
For example, energy saving can be expected by
changing to different setting temperatures for day
and night operations.
• System access is protected by
ID/Password.
Channel List
The condition of each channel (measurement
item) is displayed together with the upper and
lower limit setting data.
Set Value Information
Set values of SANYO biomedical devices can
be changed through the network.
*The above function is only applicable to remote-
controllable devices.
Specifications
Model
MTR-L03
Product name
Ethernet (LAN) Interface
Exterior
74 x 63 x 58mm
dimensions
(2.9" x 2.5" x 2.3")
(W x D x H)
Power supply
DC5V (to be supplied from the
attachment device)
Output terminal
RJ-45 twist pair cable 8-pin
connector
Compatible
TCP/IP *Only static IP
protocol
(Impossible to use DHCP.)
Note
MTR-L03 is not equipped with
sensors for temperature, etc. As
information such as in-box
temperature, etc., results
measured at the sensors of the
incubators and freezers are
transmitted to the network.
Model
MTR-5000
Product name
SANYO Data acquisition software
No. of devices to
32 devices at most (up to 100 ch)
be monitored
Devices to be
SANYO biomedical devices
monitored
connected to MTR-L03 or MTR-
480 (RS232C or RS-485)
Monitoring PC
CPU: Core2DUO or higher
Recommendable
Memory: 1GB or more
specifications
HDD: 80 GB or more
OS: Microsoft Windows XP SP3
(compatible with Windows Vista)
• SANYO cannot guarantee operations of all PCs satisfying the
above recommendable specifications.
• If other software is installed in a PC in which this software
was installed, information may be deleted due to malfunction.
Caution: SANYO guarantees the product under certain
warranty conditions. SANYO in no way shall be responsible for
any loss of content or damage to content.
• Appearance and specifications are subject to change without
notice.
Dimensions MTR-L03
65 (2.6")
74 (2.9")
63 (2.5")
Note:
All screen images shown in the catalog are composite images.
In the unlikely event of a mechanical failure, the contents of
the incubator and any recorded data cannot be guaranteed.
SANYO Electric Co., Ltd.
Biomedical Division
http://biomedical.sanyo.com/
©2009 SANYO Printed in Japan 2009.7 MA
SHR147
[Unit : mm (inch)]
Advertisement
