Removing The Sfp/Sfp+ Transceiver Module - Planet MGB Series User Manual

4-2 Removing the SFP/SFP+ Transceiver Module

1. Make sure there is no network activity by consulting or
checking with the network administrator.
2. Remove the Fiber Optic Cable gently (See Figure 2).
3. Turn the handle of the SFP/SFP+ Transceiver module to the
hori-zontal level.
4. Pull out the SFP/SFP+ Transceiver module gently through
the han-dle.
Never pull out the SFP/SFP+ Transceiver module without pulling the handle or the push
bolts on the module. Directly pulling out the SFP/SFP+ Transceiver module would damage
the SFP/SFP+ Transceiver module of the device.
Warnin g
SFP/SFP+
Figure 2: Removing the SFP/SFP+ Mini-GBIC Module
- 21 -
Copper
SFP/SFP+