Assembling The Bbq - tepro TORONTO XXL Operating Manual

Assembling the BBQ

Unpack BBQ
Unpack the BBQ and dispose of all
packaging materials. Keep the packaging
materials out of the reach of children and
dispose of them according to regulations
after BBQ assembly.
Take the following steps to assemble the
BBQ.
Step 1
Connect the two side walls (2) and the rear
wall (1) using screws (A).
Connect the front wall (3) and the two side
walls (2) using screws (A).
Please note: Use the first and the third
holes for the screws.
Step 2
Fasten the two ventilation discs (12) to
the side walls (2) using screws (A) and
nuts (I).
Step 3
Stick the two feet (6) under the right
support legs (4,5).
Pay attention to the L and R (left and right)
as well as the F and B (front and back)
markings on the support legs.
Step 4
Fasten the left (7,8) and the right (4,5)
support legs using screws (A) to the
inverted firebox.
Note:
Now use the second and the fourth holes
for the screws.
t
31