Kit Contents; Mounting The Ag15 To Trailer Nose - Samsara AG15 Installation Manual

Kit Contents

• AG15 trailer-tracking asset gateway with
included power harness
• Self-tapping screws
• Ring terminals
• Bullet connectors
• Zip ties

Mounting the AG15 to trailer nose

Covert mounting options available. Contact support at www.samsara.com/support
1. Place the AG15 on the forward facing bulkhead, between studs. The top of the AG15 should have a clear view of the sky,
with the harness facing down.
Dry van: Place the AG15 above the J560 receptacle
Reefer: Place the AG15 to either side of the reefer unit. The AG15 can also be placed in the reefer cabinet as long as it is
facing upwards with no large metal obstructions above it.
2. Secure the AG15 using four supplied self-tapping screws. Pilot holes may be necessary if securing to chrome or steel.
3. Plug the included power cable into the AG.
Dry van installation with power harness routed through J560's built-in cable grommet
support@samsara.com
AG15
J560
TRAILER INSTALLATION GUIDE