Replacing The Memory Module(S); Procedure; Postrequisites - Dell Inspiron 20 Owner's Manual

Replacing the Memory
Module(s)
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Align the notch on the memory module with the tab on the memory-
module connector.
2 Insert the memory module into the memory-module connector, and
press the memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module
and reinstall it.
NOTE: Use the memory module socket marked as DIMM2 if only
one memory module is in use.
1 notch
3 Slide the tabs on the memory-module shield under the tabs on the
system-board shield until the memory-module shield is fully secured.

Postrequisites

1 Replace the back
2 Replace the stand
32
Computer. After working inside your
cover.
assembly.
After Working Inside Your
2 tab