Sanyo PLC PLC-XW250 Specification Sheet

Ultra Portable Multimedia Projector PLC-XW250/XW200
High Cost Performance with Easy Setup Function
Easy Setup Function

PLC-XW250 / XW200 provides "Auto Setup Function" that
corrects vertical shape distortion by searching for an input
signal and detecting projector
incline, reducing setup time.
Furthermore, the "Screen
Guidance Function" allows
projector set up according to
the displayed guidance. This
function provides all an easy
guide to projection.
 Wired LAN(RJ-45) for projector control
This model is equipped with Wired LAN(RJ-45) that allows
you to manage and control projector via Network. It is
possible to check the operating time of lamp and manage
the warning notification by Email. Power ON/OFF and
switching of input sigal can be controled. You can save a lot
of time with manage and control.
Enviroment friendly power consumption in

standby mode: 0.4w
We've reduced the power consumption in standby mode to
0.4w. Caring for the enviroment is required due to global
warming and CO2 reduction. The standby power consumption
is reduced by 84% compared to previous model.
PLC-XW250 2600 lumens
PLC-XW200 2200 lumens

Other Features


• D-sub 15pin for Input, D-sub 15pin for Input or Monitor out
• Direct power off (AC plug out before turned-off)
• 18 languages (Operation menu) ... New: Thai, Turkish
• Colorboard (4 color) mode, Security:PIN code lock, Key lock

Specifications

Model name PLC-XW200, XW250 series
Panel 0.55 inch TFT p-Si x 3
No. of pixels 2,359,296 (1024 x 768 dots)
Projection lamp 220W UHP
Brightness(Lamp mode : "High" & XW250 : 2,600 lm
Image mode: "Dynamic") XW200 : 2,200 lm
Contrast 500:1 (Lamp mode : "High" & Image mode: "Dynamic")
Uniformity 85% (corner to center)
Projection lens F2.0-2.15,
Screen size 40" - 300 ", 1.3m - 11.8m / 4.3' - 38.7', U:D = 6:1
100" at 3.3m - 3.9m, 10.8' - 12.8', 1 : 1.2 Manual driven
Zoom / Focus
HDTV signals 480i, 480p, 575i, 575p, 720p, 1035i and 1080i
Color systems PAL / SECAM / NTSC / NTSC4.43 / PAL-M/N
Video Signal Composite, S-Video, Component
D-sub15 x 1 : Analog RGB Input
(Component and S-video input with conversion cable)
Computer Terminal
D-sub15 x 1 : Analog RGB Input or Monitor out
Video Terminal RCA x 1 : Composite video
Computer compatibility (UXGA/WXGA)/SXGA/XGA/SVGA/VGA/MAC
Mini-Jack (stereo) x 1 : Input (for Computer & Video)
Audio
Mini-Jack (stereo) x 1 : Output (variable audio out)
Communication Terminal
RJ-45 (LAN) D-sub 9pin (RS 232C)
Presentation Tool Freeze / Digital Zoom / No Show / etc
Other Feature Progressive, 3-2 & 2-2 pull down, User Logo
Scanning frequency H/V sync 15 - 100kHz, 50 - 100Hz, Dot clock 140 MHz
Sound output 1.0 W Mono
Fan Noise 29dBA (Lamp mode "Eco")
Voltage 100V-120V AC, 200V-240V AC
Power consumption XW250 : 212W / 296W (Lamp mode: Eco / High)
XW200 : 212W / 272W (Lamp mode: Eco / High)
Standby power consumption 0.4W / 4.3W (Standby mode: Eco/ Network)
Dimensions (W x H x D) 13.1" x 3.4 " x 9.7" (not including protruding parts)
Weight 5.5 lbs.
* Replacement Lamp Type No.: 610 345 2456
* 1 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international
standards.
* 2 For analog signal only, limitations on certain output signals. Does not support all types of input signals.
* Specifications as of May 26, 2009, subject to change.
* All product names and company names are trademarks or registered trademarks of their respective
companies.
SANYO Presentation Technologies
888-337-1215 www.sanyoprojectors.com
Toll free:
f = 18.38 - 22.06 mm / 0.72" - 0.87"
©
2009 SANYO North America Corporation.