Table of Contents
Advertisement
Remote control unit preparation
Battery installation
Insert the battery while observing the correct (+) and (-)
polarities as illustrated at right.
Service life of batteries
The life of a battery normally lasts for about one year
although this depends on how often, and for what
operations, the remote control unit is used.
If the remote control unit fails to work even when it is
operated near the player, replace the battery.
Use one size CR2025 battery.
Note:
Do not attempt to recharge, short-circuit, disassemble,
heat or throw batteries into the fire.
Do not drop, step on or otherwise impact the remote
control unit. This may damage the parts or lead to
malfunction.
If the remote control unit is not going to be used for a
long time, remove the battery. Otherwise, electrolyte
may leak which may lead not only to malfunctioning
but also burns if contact is made with the electrolyte.
Wipe away any electrolyte leak inside the remote
control unit, and install new batteries.
If any electrolyte should come into contact with parts of
your body, wash it off thoroughly with water.
Remote control operation range
Point the remote control unit no more than 7m away from the
remote control sensor and within 60˚ angle from the front of
the player.
The operating distance may vary according to the
brightness of the room.
Note:
Do not point bright lights at the remote control sensor.
Do not place objects between the remote control unit and the
remote control sensor.
Do not use this remote control unit while simultaneously
operating a remote control unit of another equipment.
A
B
A
B
REMOTE SENSOR
REPEAT
SUBTITLE
TITLE
AUDIO
F.BWD
ANGLE
7
7 m
30
30
DISPLAY
SETUP
MUTE
P/N
1
2
3
4
5
6
A-B
7
8
9
1/ALL
MENU
CLEAR
0
+10
PLAY
STOP
SELECT
PAUSE/STEP
SLOW
F.FWD
PREV
NEXT
ZOOM
PROGRAM
SEARCH
Advertisement
Table of Contents
