Conf. & Change Page In The Light Mode; Controlling All Together; Setting All Together - Sanyo PJ-Net Organizer Plus POA-PN40 Owner's Manual

Chapter 4 Controlling the Projector
(Conf.&Change page in the light mode)

Controlling all together

"Power & Status", "PC adjustment", "Control" and
"Setting" can be controlled all together. Set "ON" the
multi control setting and adjust controls of each menu.
The setting value is applied to the registered projec-
tors sequentially .
This is effective only if the mode of the registered projector
✐
is set to "Control".

Setting all together

"E-mail setting", "SNMP setting" and "Timer" can be
set all together. Set "ON" the multi control setting and
items of each menu. The setting value is applied to the
registered projectors sequentially.
This is effective only if the mode of the registered projector
✐
is set to "Control".
60
Conf. & Change page in the light mode
Following functions in the "Conf. & Change" page are
not available in the light mode.
- Changing the control mode.
- Deleting the registered IP address
- Indicating the each status
- Indicating the each memo
This indicates that the
mode is "Control".