Do not use the device in potentially explosive atmospheres, for Follow the manual measurements in liquids or at live parts. Trotec accepts no Information marked with this symbol indicates that the liability for damages resulting from improper use. In such a operating manual must be observed.
Information about the device Device description The device BM40 is suited for the non-destructive material moisture measurement in mineral building materials and wood. The measuring probe is pressed against the material to be tested. The moisture level is then measured by capacitive...
After approx. 10 min Dimensions (length x width x height) 168 x 35 x 75 mm Weight 220 g Scope of delivery • 1 x Moisture measuring device • 1 x 9 V battery • 1 x Quick guide moisture measuring device BM40...
ð The device starts in the measuring mode °C. non-use. ð The measured value is displayed in real time on the 1. Press the power button (3) for approx. 3 s. measurement value display (8). ð The device switches off. moisture measuring device BM40...
Experience has shown that this occurs at the outlet of veneer drying plants. Remove the static charge by use of suitable grounding measures. – For optimum conditions neither electrical fields nor conducting materials should be present. moisture measuring device BM40...
Need help?
Do you have a question about the BM40 and is the answer not in the manual?
Questions and answers