Siemens Desigo RXB Technical Manual page 319

ETS3 Professional
ACS Service
HandyTool
Actuator type
Siemens
Building Technologies
Select Edit parameters, Sequences.
Select sequences under Parameter settings .
Parameter Short name
*050 Control sequence
Setting
Parameter
Control Changeover
sequence Cooling only
Heating only
Different applications support different valve actuators, and these do not all require the
same number of outputs on the controller. The tool displays the actuators suitable for
the selected application. The valve type must be selected at the engineering stage (see
page 85).
RXB (KNX) application library
Control sequences
Description
Changeover signal via KNX bus
Cooling sequence only
Heating sequence only
FNC Description of functions for FC-10, FC-11, FC-12
Basic setting
Cooling Only
Handy-
Tool
CM110385en_05
28 Feb 2009
0
1
2
83/166