Adjusting Menu Options; Picture Control; Accessing Picture Menu; Selecting Picture Options - Sanyo AVP-429 Instruction Manual

Depending on the signal tuned, you may see different MENU options on your screen. As an example, Menus
displayed below are based on TV mode.

Picture Control

Accessing Picture Menu

1.
Press MENU.................
2.
Highlight [Picture].........
Use or button.
3.
Press OK .....
. .......... ....
To highlight an option and to change settings, press ??? ?. Press OK to confirm the selection or alter the settings.
Press EXIT to exit.
Selecting Picture
Options
To quickly change the aspect ratio,
press the ZOOM button repeatedly.
..
Option
Picture Settings
Screen Settings
Aspect Ratio
Color Temperature
Cinemotion
3D Comb Filter
Temporal NR
(Analog)
HDMI Conversion
RESET PICTURE

Adjusting MENU Options

Picture Picture Settings
Screen Settings
Audio
Aspect Ratio
Color Temperature
Settings
Cinemotion
3D Comb Filter
Channels
Temporal NR
HDMI Conversion
Locks
RESET PICTURE
Guide
Description
Select to access a picture adjustment window, see [Adjusting
Picture Settings] on next page.
Select to access a screen adjustment window for VGA or
Component input, see [Adjusting Screen Settings] on next
page.
Select to access a window in which you can choose a proper
aspect ratio for 4:3 or 16:9 program. Select from [Normal],
[Direct], [Full Screen], [Panoramic], [ZOOM 1] and [ZOOM 2].
Choose from the following color temperatures:
Cool
Select to give the white colors a blue tint.
Neutral Select to give the white colors a neutral tint.
Warm
Select to give the white colors a red tint.
Select [ON] to optimize the screen display automatically
detecting film content and applying a reverse 3-2 pull down
process. Moving picture will appear clearer and more natural
looking. Select [OFF] to disable the detection.
Select to provides high quality images with minimal dot
crawl and cross color noise.
Select from [Off], [Low], [Medium] and [High].
Select to reduce the noise level of connected equipment. This
also reduces the noise level to the signal from the RF jack.
Select from [Off], [Low], [Medium] and [High].
Select to change color space for some irregular HDMI signal.
Select [ON] when you find abnormal color while viewing
HDMI programs. Be sure to select [OFF] for normal HDMI
signal.
Select to reset picture settings and adjustments to the
defaults.
ON
OFF
27