Advertisement
Quick Links
Read this owners manual thoroughly before use and save.
1.0 METER FUNCTIONS
10
9
5
3
4
15
2
13
12
CONTENTS
1. Meter Functions
2. Read First
2.1 For Your Safety
3. Operating Instructions
3.1 AC Volts
3.2 DC Volts
3.3 Resistance
3.4 Diode/Continuity
Testing
2.0 READ FIRST: IMPORTANT SAFETY INFORMATION
Read this operators manual thoroughly before using this multimeter. This manual is intended to provide
basic information regarding this meter and to describe common test procedures which can be made with
this unit. Many types of appliance, machinery, and other electrical circuit measurements are not
addressed in this manual and should be handled by experienced service technicians.
The marking "
" on the equipment represents Caution, risk of electric shock.
The marking "
" on the equipment represents Caution, risk of danger.
The marking "
" on the equipment represents Functional earth terminal.
The marking "
" on the equipment represents Equipment protected by DOUBLE INSULATION or REINFORCED INSULATION.
7 Function, Auto Ranging Digital Multi-Meter
1
14
6
8
7
15
11
3.5 Temperature
Measurements
3.6 Household Battery
Testing
4. Battery Replacement
5. Auto Off
OPERATING INSTRUCTIONS
GDT-3200
1.1 FUNCTIONS (Figure 1)
1. 2000 count digital display
2. 7 Position Function Dial
3. AC Volts
4. DC Volts
5. Resistance
6. Continuity/Diode Test
7. Temperature (32°F - 482°F, 0°C - 250°C)
8. Battery Test
9. Backlight Button
10. Low Battery Indicator
11. Common Input Jack
12. Positive Input Jack
13. Protective Rubber Boot and Tilt-out Stand
14. Mode Select Button
15. Off Dial Selection
1.1 METER FUNCTIONS
Meter type:
Auto Ranging
Functions:
7
Ranges:
6
Display Count:
2000
Input impedance:
10 Meg Ohm
AC Volt ranges:
500 (0.8% + 5 digits)
DC Volt Ranges:
600 ±(0.5% + 5 dgts)
Resistance Ranges:
20MΩ <1MΩ(0.8% + 5dgts) ≥ 1MΩ±(2% + 5dgts)
Continuity/Diode Function: Selectable
Temperature Range:
32°F - 482°F
Battery Test Ranges:
1.5V
Auto Off:
15 Minutes
Operating Environment
Indoor Use
Operating Temperature:
0°C - 40°C
Storage Temperature:
-10°C - 50°C
Relative Humidity:
0% - 75%RH (0°C - 31°C)
0% - 50%RH (31°C - 40°C)
Battery Type:
2-AAA
Battery Life:
100 hours with carbon-zinc cells,
200 hours with alkaline cells under
normal conditions.
Over Range Indication:
"OL" is displayed at the left when
the range capacity is exceeded by the input.
Polarity Indication:
Negative displayed, positive implied
Size (LxWxH):
5.51" x 2.83" x 1.26"
Agency Approvals:
ETL, CE, CAT III 600V
Note: Accuracy is given for one year at 23°C ± 3°C rH<70%
1
Advertisement
Related Manuals for GB GDT-3200
Summary of Contents for GB GDT-3200
-
Page 1: Operating Instructions
OPERATING INSTRUCTIONS 7 Function, Auto Ranging Digital Multi-Meter GDT-3200 Read this owners manual thoroughly before use and save. 1.0 METER FUNCTIONS 1.1 FUNCTIONS (Figure 1) 1. 2000 count digital display 2. 7 Position Function Dial 3. AC Volts 4. DC Volts 5. - Page 2 Use extreme caution when using this multimeter. Improper use of this meter can result in severe damage to property, severe personal injury or death. Follow all instructions and suggestions in this operators manual as well as observing normal electrical safety precautions. Do not use this meter if you are unfamiliar with electrical circuits and proper test procedures.
- Page 3 3.3 RESISTANCE When measuring resistance always make sure the power is off. WARNING 1. Connect the black test lead to the "COM" terminal and the red test lead to the "V/Ω" input terminal. 2. Set the dial to resistance (ohms). 3.
Need help?
Do you have a question about the GDT-3200 and is the answer not in the manual?
Questions and answers
Can GDT-3200 be used to test a 12 volt battery?
Yes, the Gardner Bender GDT-3200 can test a 12-volt battery. It has a DC voltage measurement range up to 600V and includes a battery test function for 1.5V batteries. While the battery test function is for 1.5V, the DC voltage measurement feature can be used to check the voltage of a 12V battery.
This answer is automatically generated