Checking, Changing And Deleting Reservations; Problem Solving For Programmed Recordings - Sanyo DVR-S120 Instruction Manual

Checking, Changing and Deleting Reservations

1. Turn the TV on and select input from the DVD recorder. (For details
on operation methods, refer to your TV's manual.)
2. Press TIMER to display the TIMER screen.
3. Select "Timer List" using 8 or 2, and press the k button.
To Exit Press TIMER
4. The "Timer List" screen is displayed. Check the reservation details.
If necessary, change, delete, or make new reservations.
Date Ch. Start / End
20/04 AV2 21:00/23:00
Sat 02 12:51/13:55
Mo-Fr AV-3-S 06:00/06:30
Press OK to Edit Entry,CLEAR to Delete
To Exit Press TIMER
To change a reservation
Select the line to change using 8 or 2, and press the k button. The
"Timer Setup" screen is displayed. Set the reservation details again. (For
details on operation methods, see page 20.)
To delete a reservation
Select the line to delete using 8 or 2, and press the CLEAR button.
The "Timer Delete" screen is displayed. Select "OK to Delete Timer" and
press the k button.
OK to Delete Timer
To make a new reservation
Select a free line, and press the k button. The display returns to
the "Timer Setup" screen. In this screen, you can reserve a different
programme.
1. Press TIMER to return to the "Timer" screen, and press TIMER again.
This ends checking of reservations.
21
Timer
Video Plus+
Timer Setup
Timer List
Timer List
Mode VPS/PDC
SP
LP
LP
Total Recording Time: 04:15
Timer Delete
Cancel

Problem solving for programmed recordings

The following problems/error messages appears on the screen while operat-
ing the DVD recorder. Possible solutions are provided in this section:
Error Message
Insert Record- A write-protected disc has been inserted. Cancel the
able Disc and protection (See "To cancel disc protection" page 30)
Press o to or insert a different disc.
Start Recording
Invalid Setup, The data for the recording could not be transferred.
please correct Please check the date, start time and end time of
the programmed recording.
Timer Overlaps The information for two programmed recordings
Existing Timer overlap.
If you ignore this error message the TV programme
with the earlier start time will be recorded fi rst. You
will miss the start of the second programme.
Change the information for one of the recordings or
delete one of the recordings.
Warning
Timer Recording! The DVD recorder was switched on several minutes
Press o to before the start of a programmed recording. Switch
Start Recording. off the DVD recorder with o. A programmed
recording (timer) will only function if the DVD recorder
is switched off (button o).
Solution
Solution