Page 2
1. Do NOT leave this appliance unattended while department or dial 911. Stay clear from WARNING WARNING in use. The user must remain in the immediate flames. Do not attempt to extinguish an oil or If you smell gas: • To installer or person assembling this area of the product and have a clear view of the grease fire with water.
Page 3
Perform a leak test. a vehicle, which may become overheated by the • LP dealer must purge tanks before filling. to check for gas leaks. • The regulator may make a humming or whistling sun. • Dealer should NEVER fill LP tank more than Use a clean paintbrush and 50/50 soap and water noise during operation.
Page 4
Always use cap and strap supplied with valve. Leak Testing cylinder valve are turned to the “OFF” position. 4. If the burner does not light, turn the control 1. Turn all control knob(s) to OFF. Do not use a POL transport 2.
Page 5
are at the desired temperatures to sear the food Burner Assembly/Maintenance or holes are found replace burner. IMPORTANT: a non-citrus based soap and water. Be sure • Although your burner is constructed of stainless sugars when cooking. After lighting your grill, Burner opening must slide over valve nozzle.
1. Remove Qty (2) bolts from drum as shown. PARTS LIST FINGER HOLE Propane Tank Bracket PGSEAR PARTS LIST FLAVOR SCREEN PGSEAR-1 M6 LOCK WASHER (2) 2. Install the propane tank bracket as shown 9. Install cast iron grate as shown. using existing hardware.
Need help?
Do you have a question about the BBQ SEAR BOX and is the answer not in the manual?
Questions and answers