How To Obtain The Instruction Manual - Sanyo Xacti VPC-CG20 Manual For Basic Operation

How to obtain the Instruction Manual

1
Remove the card from the camera.
h The program to access the website is stored in your camera's internal
memory. This program cannot be accessed while a card is installed in
the camera.
2
Start your computer, and use the supplied dedicated USB interface
cable to connect your camera to the computer.
h Connect the camera's USB/AV terminal to the computer's USB
connector.
3
Turn on your camera (page 17).
h The USB Connection Screen appears on the camera's monitor.
USB CONNECTION
COMPUTER
PRINTER
CANCEL
CANCEL
SET
45
English
OK
To USB connector
Supplied dedicated
USB interface cable
To USB/AV terminal