TECHNICAL SPECIFICATIONS INSTALLATION Working voltage: DC 12V Only Bluetooth distance: 30ft (no obstacle) Frequency band: 2.4 ghz Maximum LED Trim: 4 x per Hub Maximum amperage draw: 3A • Choose your desired location. – see suggestions above) • Use the lift panel tool to increase space between panels if needed, then carefully slide trim light into the gap between interior panels.
Page 3
• Connect the Trim Light to the Extension POWER Cable 3A fuse • Peel off the 3M double-sided tape on the back of the LED emitter and place it on the dash board. Two power options available 12V plug-in power adapter 12V hardwire •...
Page 4
FCC & IC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, 1. Do not install or use product if it, in any and (2) This device must accept any interference way, impairs the safe operation of your received, including interference that may cause...
THE NEXT LEVEL the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are Antenna Type Max. Antenna Gain (dBi)
Need help?
Do you have a question about the Plug and Glow and is the answer not in the manual?
Questions and answers