Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for FK Irons Spektra Direkt 2
Summary of Contents for FK Irons Spektra Direkt 2
- Page 1 Crossover Machine USER MANUAL 2018...
-
Page 2: Package Contents
USER MANUAL MACHINE OVERVIEW PACKAGE CONTENTS • Direkt 2 MachineBody • Stroke Changing Tool • Spektra HexDrive MotorBolt • 2 Tensioner O-rings • 1/16” Allen Key • 2 Spare 1-72 1/8” Socket Head Stroke • 2.8mm Stroke Cap Securing Screws •... - Page 3 USING THE DUALLY COMPATIBLE VISE AND NEEDLE CLIP The Spektra Direkt 2’s patent pending collet vise system is compatible with both standard backstem style tubes (5/16” - 8mm dia.) and screw-on-style adjustable cartridge grips (with a M16x1mm female threading). Fully assembled, the machine is set up to accept a standard backstem style tube. To use the machine with...
- Page 4 USER MANUAL MACHINE OVERVIEW REMOVING DRIVE BARS OR NEEDLES In order to remove the drive bar or needle from the Clip-on Armature, gently pull the bar up from the front of the armature between the armature pin and machine vise. Do not attempt to pry off the bar from the rear or the machine or by using additional tools as this could cause damage to the Armature Clip.
- Page 5 CHANGING THE STROKE The stroke of the Direkt 2 is interchangeable between 2.8mm, 3.4mm and 4mm sizes using the included Stroke Caps. In order to change the stroke of the machine, release the MotorBolt unit from the Machine Body and insert the Stroke Changing tool into the motor’s place;...
- Page 6 Body components not subjected to normal wear and tear will be covered under warranty for the life of the machine. The enclosed Maxon Motor will be covered under warranty for 1 year from the date of purchase. Should this product be defective, FK Irons will repair or replace the product for a current available model of equal value.
Need help?
Do you have a question about the Spektra Direkt 2 and is the answer not in the manual?
Questions and answers