Download
Share
Print this page
Aseko ASIN AQUA Salt Manual
  1. Manuals
  2. Brands
  3. Aseko Manuals
  4. Swimming Pool Filter
  5. ASIN Aqua SALT
  6. Manual

Aseko ASIN AQUA Salt Manual

Hide thumbs Also See for ASIN AQUA Salt:

Advertisement

Quick Links

Download this manual
ASIN AQUA
Salt
®
EN
C U T T I N G E D G E T E C H N O L O GY
for cr ystal clear and healthy pool water
Electrode TE–25
w w w.aseko.com
EN
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the ASIN AQUA Salt and is the answer not in the manual?

Questions and answers

Related Manuals for Aseko ASIN AQUA Salt

Summary of Contents for Aseko ASIN AQUA Salt

  • Page 1 ASIN AQUA Salt ® C U T T I N G E D G E T E C H N O L O GY for cr ystal clear and healthy pool water Electrode TE–25 w w w.aseko.com...
  • Page 2 General safety information This user manual contain basic information that should be observed during assembly, start-up, operation, and maintenance. Therefore, this user manual must be read by installers and operators prior to assembly and start/up, and must be accessible to every user of this unit. Additionally, all further safety information in this document absolutely must be observed.
  • Page 3 Handling chemicals for pool water treatment The chemicals used with the ASIN AQUA Salt must be handled in a safe manner to prevent damage or personal harm. Aseko recommends you always use personal protective safety equipment when handling the pH and chlorine agents.
  • Page 4 What do you receive in your box Device Water thermometer with housing #12010 ASIN AQUA Salt Probe housing 2 pcs #12013 Peristaltic pumps #12093 Flowmeter #12106 Electrode TE–25 Salinity measuring unit Measured water filter #12090 CLF* probe #12052 pH Probe Long Life #12012...
  • Page 5 Pressure-type level sensor #12086 Inserting plug DN50 Air thermometer #12010 pH 7.00 Buffer #12065 1/4“threaded #12134 Redox Buffer #12063 Original Aseko Chemicals 20 l for pools Sea salt #12110 pH MINUS #12130 ALGICID #12156 5 l for whirlpools pH MINUS #12131...

  • Page 6: Pool

    Water treatment pH control and dosing ASIN AQUA Salt is adjustable to dose pH MINUS or pH PLUS. Treatment for stabilizing of pool water acidity at the optimum level. Precise measuring by pH probe combined with the system digital intelligence controls the preset pH level of the circulating pool water in all pool operation modes and variable environment conditions.
  • Page 7 Pool management functions Filtration Time Control Daily, automatic start of the filtering for individually preset periods. Water Level - Refilling Water level can be monitored by optional level sensor #12086. System can be individually programmed to control up to four different water levels at your pool and switch the water refilling or waste water draining on/off (this requires an optional Besgo valve for automatic backwashing).
  • Page 8 Aseko Web Services The system can be connected to Internet using the integrated power adapter. You can easily monitor data of your pool on the route at http://ipool.aseko.com or using the iPool Live application. iPool Live application iOS and Android smartphone application that gives you overview of your pool status wherever you are connected to internet.
  • Page 9 Enhancement of filtering efficiency activated filter media ® AFM is direct substitute for filter sand. It doubles efficiency of the existing filtration system. AFM is resistant to biological pollution and formation of so- ® called bio-film.

  • Page 10: Injection Valve 2

    ASIN AQUA Salt Installation ASIN AQUA Salt is to be wall mounted in dry and dust-free environment with temperature ranging from +5 °C to +40 °C. Install the mounting rail, which serves for attachment, to the wall. Select location so that free space at least 40 40 °C...

  • Page 11: Redox

    Installing the Probes Wrench socket for probes Carefully insert the pH, CLF or REDOX probe into the housing. Hand tighten or use the attached plastic wrench socket for probes. Connect the connector and lock it by tightening a connector ring. After probes have been inserted, slightly tightened and connectors have been connected, ASIN AQUA Salt is ready for connection to the water system of your pool.

  • Page 12: Electrode

    Griffon UNI-100 or Griffon UNI-100XT. Never use any fast drying glue. After you insert the branch line to the system you can connect the power supply cables coming from the control unit ASIN AQUA Salt to the electrode. Connection of salinity...
  • Page 13 ATTENTION! glue the electrodes with glue: Griffon UNI-100 or Griffon UNI-100 XT NEVER USE FAST DRYING GLUES !!! DO NOT USE ANZ ALCOHOL CLEANING AIDS!!! 184 mm 150 mm Ø 50 mm 50 mm 50 mm Ø 50 mm Thermometer Teploměr Waste Odpad...

  • Page 14: Measured Water

    2. to non-pressure (overflow tank) 3. upstream of filter pump After the water inlet has been connected and opened, your ASIN AQUA Salt is ready to measure and adjust the pH and Cl value in your pool so as to achieve the required values.
  • Page 15 POOL WATER INLET Thermometer Teploměr THE WATER OUTLET CAN BE REALISED: 1. downstream of filtration 2. to non-pressure (overflow tank) 3. upstream of filter pump Waste Odpad Besgo Besgo FROM POOL Z BAZÉNU TO POOL Heating DO BAZÉNU Ohřev...
  • Page 16 Pool Chemicals Connection In this step, it is necessary to connect the injecting valves of individual chemicals to the dosing pumps and dosed agents. Place the injecting valve in the T-joint, blinded with the DN50 1/4” threaded plug #12134. Cut the PE tube at 90 ° angle to ensure proper fitting. •...
  • Page 17 Max 2 m Max 8 m Thermometer Teploměr Waste Odpad Besgo Besgo Z BAZÉNU FROM POOL TO POOL DO BAZÉNU Heating Ohřev...
  • Page 18 Accessories connection POWER SUPPLY 230 V ~ 50 Hz T125mA Besgo valve POTENTIAL-FREE RELAY Refilling solenoid Max 1 A Max 230 V Heating relay T800mA Water level sensor Flowmeter SENSOR INPUTS Water thermometer 4 – 20 mA Outdoor air thermometer External display RS 485...
  • Page 19 Connect the filtering device to the ASIN AQUA Salt switched socket outlet (filtration power supply - max. 1.4 kW / 230 VAC). Connect the 230 V / 50 Hz mains cable to ASIN AQUA Salt (on the right side). The mains socket outlet must be protected by a residual current device (RCD).
  • Page 20 PE tube. DO NOT FORGET! Provide the testing run and stop of all accessories connected to ASIN AQUA Salt. At this step just test, do not dose the aids or provide the initial dose of chemicals! If bubbles occur here, the pump draws air in.
  • Page 21 Control Basic Screen The basic screen display measured, required values and status information. E.g. click on the Chlorine tab to enter the setting of the required chlorine value in pool water. Dosage Value Required. substance. Value Measured. Measured Units. The chlorine pump status – ON. Controls ON/OFF indicates the Manual control allows to:...
  • Page 22 To ensure the correct function of timers, set the current date and time. Pool Volume To ensure the correct function of ASIN AQUA Salt, enter the correct volume of your. Calculate your pool volume in m Length (L) times width (W) times depth (D) is volume (V) - (L × W × D = V).
  • Page 23 • If the pool water temperature drops below the value set in the freeze protection menu (4°C), ASIN AQUA Salt will continue filtering and switch on the pool water heating. After the required freeze protection temperature has been reached, heating and filtering will stop.

  • Page 24: Pressure-Type Level

    4 to 10 min, at SPA 1 to 10 min. Delay time after start (upon timer switching on) is time after start for which ASIN AQUA Salt does not take any action and it waits for stabilization of a signal from probes.
  • Page 25 Choosing the disinfection probe CLF free chlorine probe Free chlorine measurement Redox probe of the RX potential Measurement of redox potential...
  • Page 26 • organic pollution Instructions to operate the electrolyzer: Never switch on the ASIN AQUA Salt before the salt concentration in the pool water reach at least 3g/l. This may cause the electrode damage. Optimum concentration is 4g/l. Quantity of produced disinfection by ASIN AQUA Salt is controlled by salt concentration, time of ASIN AQUA Salt operation.
  • Page 27 Salt to be used Do not use rock salt. All additives may cause electrode lifetime shortening. ASIN AQUA Salt is designed to electrolyze water with 4 kg/m salt concentration. Electrode may get damaged at lower salt concentrations than 3 kg/m .
  • Page 28 • Set FLOC+C to 10 ml m per day (see the chaper FLOC+C Setting). 2. Close the water supply to the probes ASIN AQUA Salt display “No water supply to the probes” notification. 3. Perform superchlorination SuperCHLOR #13120 Perform superchlorination of pool water with Super CHLOR (inorganic active chlorine without stabilizers).
  • Page 29 Setting Considering that the ASIN AQUA Salt water treatment system is efficient in the broad pH range, it is useful to enter the required pH value equal to pH value of water you refill or slightly lower. Required pH value = refilled water pH value (in the range from 7,3 to 7.6) pH may change during operation but if it is in the range from 6.8 to 7.5 you do...
  • Page 30 (regardless of the required value according to the table). Repeat the measurement after the water in the pool is mixed thoroughly and the required value shown on the ASIN AQUA Salt display is settled. Repeat the process until the chlorine concentration in pool water matches the required value then set the correct required value according to the table.
  • Page 31 “ADEQUATE” • If the chlorine value in pool water is , your ASIN AQUA Salt is prepared to maintain the required concentration of chlorine in pool water. • If the chlorine value in pool water is , increase the required REDOX mV value in the menu.
  • Page 32 Response If the measured pH value does not change even after preset quantity of doses (according to the settings), ASIN AQUA Salt stops pH dosing and an error message appears on the display. The other ASIN AQUA Salt functions are not limited.
  • Page 33 Probe Calibration When pH is being measured in operation, there may be a difference between the ASIN AQUA Salt value and the current pH value measured directly in water. Calibration can be done in two ways: With a buffer •...
  • Page 34 Calibration rules: Calibration is performed only for refining the value measured by the colorimeter or Pool Tester and the measured value displayed on the ASIN AQUA Salt (if the difference is up to 0.2, calibration is not necessary). The probe can be calibrated when the chlorine content in pool water corresponds to the required value or it is higher (measured with a colorimeter or Pool Tester).
  • Page 35 In Operation Measurement and Calibration Water Thermometer Calibration If water temperature is different from temperature shown by ASIN AQUA Salt, calibrate the thermometer in the water thermometer calibration menu. Air Thermometer Calibration If air temperature is different from temperature shown by ASIN AQUA Salt, calibrate the thermometer in the air thermometer calibration menu.
  • Page 36 ASIN AQUA Salt to your Wifi by use of Wifi extender. Powerline via 230V/DC If you have no wired access to your LAN network but your ASIN AQUA Salt is in the at the same electric network you can connect the LAN network via 230 V...
  • Page 37 INTERNET Home network INTERNET 3G / LTE WIFI EXTENDER Wifi extender INTERNET Powerline via 230 V 230 V socket outlet INTERNET...
  • Page 38 The internet connection allows you to use the iPool Live mobile application and monitor your pool on mobile devices wheresoever the internet connection is available. After you connect the ASIN AQUA Salt to the internet download the iPool Live application to your smartphone. Application is available for iOS and Android operation systems.
  • Page 39 The web application for detailed monitoring of the pool water quality by means of well-arranged graphs. It shows all the measured parameters as well as ASIN AQUA Salt actions up to 30 days back. This application is giving you the detailed information of the pool status and detailed review of all events, taken actions and act levels of monitored items up to 30 days back.
  • Page 40 In case of private pools, replace injection valve rubber bands every 2 years. In case of public pools, replace #12005 every year. #12014 pH probe pH Probe Maintenance Take the pH probe out of ASIN AQUA Salt housing and clean it from impurities. Follow the instructions attached to the used probe.
  • Page 41 Too Rapid pH Change Too rapid change of pH is usually caused by refilling water directly to the skimmer. If such rapid change of pH occur, ASIN AQUA Salt stops controlling pH for two hours. This limitation can be manually disabled.
  • Page 42 w.aseko.com...

This manual is also suitable for:

Te–25