Page 2
TrekStep™ – Installation Instructions Parts List and Hardware Identifi cation Locate Rear Bumper Attachment Left End Cap, Running Board Assembly, Part Number Part Number 476.24, Qty - 1 Locate the rear bumper attachment point on the driver’s side of the vehicle.
Page 3
TrekStep™ – Installation Instructions Assemble Linkage to Install Step Install Linkage Assembly Mounting Bracket Slide the holes in the Mounting Bracket over Use the M6-1.0 x 20 Socket Head Cap Screws to Assemble the Mounting Bracket to the Linkage. the studs on the vehicle. Reinstall the fasteners mount the Step to the Linkage Assembly.
Page 4
Operation Maintenance Tips • The TrekStep™ is foot operated and deploys and retracts with a The step pad surface and linkage arms can be washed with mild soap and nudge of your foot. water using a soft brush or sponge to dislodge any mud, dirt or accumulated road grime.
Need help?
Do you have a question about the TrekStep and is the answer not in the manual?
Questions and answers