Correcting Characters - Sanyo DSR-C100 Instruction Manual

Correcting characters

The following two character palettes are used:
For CAMERA ID and COMMENT settings
(KEY WORD SET)
CAMERA ID:HALL1
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789.,
/-$&#'"()
For PASSWORD or CAMERA ID setting
(CHANGE PASSWORD-DELETE)
OLD PASSWORD:
NEW PASSWORD:
VERIFICATION:
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789
END
BS END
36
Example: If DIGITAL has been entered as
DIHITAL (using COMMENT palettes)
1
Use the CURSOR button to select 4 (or
3) from the character palette.
(KEY WORD SET)
COMMENT :SANYO DIHITAL
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789.,
/-$&#'"()
2
Keep pressing the SET button to select "H".
The correction cursor (b) will move to "H".
(KEY WORD SET)
COMMENT :SANYO DIGITAL
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789.,
/-$&#'"()
3
Use the CURSOR button to select "G" from
the character palette and then press the
SET button.
(KEY WORD SET)
COMMENT :SANYO DIGITAL
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789.,
/-$&#'"()
4
Use the CURSOR button to select "END"
from the character palette and then press
the SET button.
When inserting spaces between characters, move
the cursor to the blank character below the letter
"N" and then press the SET button.
RECORDING CAMERA
END
RECORDING CAMERA
END
RECORDING CAMERA
END
English