Table of Contents
Advertisement
PROGRAMMING
Program memory keys (SOS, photos and M1, M2)
1)
Pick up the handset.
2)
Press
3)
Dial the phone number to be stored, eg 0612345678.
4)
Press the memory key dedicated to this number (SOS, Photos, M1 orM2).
The SOS number is the one you want to reach in case of emergency.
5)
Hang up the handset. It is advisable to make a test to verify
the registered number is correct.
6)
To change the number, repeat the procedure from 1).
Setting flash time
By default, the programmed flash time is 300ms . If change is needed:
-
+
/
-
+
/
-
+
/
Setting tone or pulse mode
By default, the TONE mode is programmed. To modify it:
-
+
/
-
+
/
SECURITY
Do not use your telephone to report for a gas leak or other potential
explosion hazard. Do not try to open your phone to avoid electrical shock.
Your telephone must be installed in a dry place, away from heat, humidity
and direct sunlight.
.
/
/
/
/
/
/
/
/
/
/
/
/
= 100ms
/
/
= 300ms
/
/
= 600ms
/
/
= pulse
/
/
= tone
6
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Xtra 1110 and is the answer not in the manual?
Questions and answers