Table of Contents
Advertisement
How to install Wi-Fi kit
Initializing user data
f If you want to initialize all the user data to set the Wi-Fi kit as factory default status, press and hold the button (SW3)
f
inside the Wi-Fi kit for 5 seconds . After releasing the button, all the lamps on the Wi-Fi kit are turned on and all the user
data is deleted .
Updating the Wi-Fi kit by SD card
1 . Make update directory in the SD card . Copy the latest S/W image and paste it into the update directory of the SD card .
2 . Insert the SD card into the SD card slot which is located inside the Wi-Fi kit . Ⓒ
3 . Press the Reset button on the side of the Wi-Fi kit .
4 . The lamp inside the Wi-Fi kit is turned on during the update . Ⓓ
f When the update is completed correctly, the lamp is turned off .
f
f When the update is completed incorrectly, the lamp blinks .
f
5 . When the update fails, the Wi-Fi kit returns to the previous version when it restarts . Retry the update but if it still does not
work, take following measures .
f Check the file for an error: change the update image (file)
f
f Check the SD file for an error: change the SD card
f
f Check the PBA for an error: change the PBA .
f
16
MULTI WIFI APP-NA_05417A-05_EN.indd 16
Type
Ⓓ
SD
Ⓒ
SDHC
Micro SDHC
Capacity
128MB ~ 2GB
4GB ~ 32GB
4GB ~ 8GB
2018-02-28 오전 11:08:36
Advertisement
Table of Contents
