Advertisement
Quick Links
g
Integral Handle Operator, Type
TDR
Congratulations and thank you for choosing the
Record Plus™ family of current-limiting circuit
breakers. The integral handle operator is listed
under UL 489 and is suitable for use with the FC100
circuit breaker series.
Record Plus™
circuit breakers are designed with a
full line of integrated accessories. All units use the
latest
in
integrated
technology
for
maximizing
the
capabilities.
Record Plus™
All
Underwriters Laboratories to the UL489 standard
and the CSA Standard C22.2, No. 5. These circuit
breakers are certified to IEC60947-2.
These accessories are also for use with our MAG-
BREAK® instantaneous trip-only circuit breakers,
which meet the same standards and are UL-
recognized
components
applications. They can also be used with our molded
case switches, which are listed per Underwriters
Laboratories to the UL489 standard.
Record Plus™
circuit breakers and their accessories
are designed and manufactured to exceed our global
customers' high standards for reliability and quality.
WARNING
: DANGER of electrical shock or injury.
Ensure that ALL electrical power supplies are OFF
before installing or removing any devices. The
breaker, trip unit, or accessories MUST ONLY be
installed and serviced by QUALIFIED personnel. See
NEMA publication AB4.
AVERTISSEMENT:
d'électrocutions.
manipulations du disjoncteur que les différentes
sources d'alimentation sont en position OFF. Les
disjoncteurs, unités de protection, ou accessoires
doivent être installés par des personnes qualifiées et
habilitées. Lira NEMA publication AB4.
modular
circuit
flexibility
in
application
product's
utilization
circuit breakers are listed by
for
use
in
Danger
contre
les
S'assurer
avant
TOUTES
DEH40914
Installation Instructions
Record Plus
Molded Case Circuit Breaker
Accessories
FCNRC
breaker
and
and
motor
FCNRCNI
Figure 1. TDR integral handle operator installed on a Record Plus™
FC100 circuit breaker (vertical orientation shown).
CAUTION:
in equipment not specifically design to accept it.
risques
Contact the equipment manufacturer for possible
equipment modifications.
ATTENTION:
employe dans un equipement non specialement
adapte a cet effet. Contactez le constructeur
concernant les possibles modifications
™
FCNRCN
This product is NOT suitable for use
Cet appareil nedoit pas etre
Advertisement
Summary of Contents for GE Record Plus
- Page 1 FCNRCNI applications. They can also be used with our molded case switches, which are listed per Underwriters Figure 1. TDR integral handle operator installed on a Record Plus™ Laboratories to the UL489 standard. FC100 circuit breaker (vertical orientation shown). Record Plus™...
- Page 2 Outline drawings procedure for the integral handle operator accessory, showing the dimensions of the installed operator are Record Plus™ type TDR, on FC100 circuit breakers, found in fig 8, fig 9 and fig 10.
- Page 3 Handle in TRIP Position TRIP Button Figure 3. Mounting the circuit breaker to the enclosure. Figure 4. Attaching the L bracket to the circuit breaker. FCNRCN FCNRC Figure 5. Mounting the handle operator on the breaker.
- Page 4 FCNRCN FCNRC Figure 6. Securing the handle operator assembly to the bracket. FCNRC FCNRCN Figure 7. Handle operator installed on horizontally mounted breaker.
- Page 6 Figure 9. Outline drawing for FCNRC.
- Page 7 Figure 10. Outline drawing for FCNRCNI.
-
Page 8: Step 4 - Check Operation
GE Company. The circuit breaker is a sealed unit that contains no user-serviceable parts. Tampering with the seal will void the warranty.
Need help?
Do you have a question about the Record Plus and is the answer not in the manual?
Questions and answers