Related Manuals for DimSport RapidBike EVO
Summary of Contents for DimSport RapidBike EVO
- Page 1 ___________________________ Installing instructions ______________________________ Aprilia Dorsoduro 750 09-16 Aprilia Shiver 07-16 (RapidBike Evo only) INSTALLATION INSTRUCTIONS Issued by: PM approved by DG Rev.07 date 01/03/16 pag. 1/12...
- Page 2 ___________________________ Installing instructions ______________________________ Attention: For a correct RB feeding voltage, check the operation of all motorbike electrical system components (lights, fuse, stock connectors, etc.). 1. Turn off the engine. 2. Remove the main seat and the fuel tank. ____________________________ Injection section ___________________________ 3.
- Page 3 ___________________________ Installing instructions ______________________________ _____________________________ T.P.S. section ______________________________ 7. Locate and disconnect the black six-way connector placed into the airbox (Fig.1). Fig.1 8. Connect the green wire of the RAPID BIKE wiring harness to the wire located in central position on the top row of the stock connector (Pin #4), using the posi-tap connector (Fig.2).
- Page 4 ___________________________ Installing instructions ______________________________ ________________________ Crankshaft sensor section ________________________ 10. Locate and disconnect the white two-way connector on the front-left side of the motorbike (Fig.3). Fig.3 11. Connect the connectors of RAPID BIKE wiring harness to the stock connectors (Fig.4). Fig.4 Issued by: PM approved by DG...
- Page 5 ___________________________ Installing instructions ______________________________ ___________________________ O2 sensor section ____________________________ 15. Locate and disconnect the 4 pin black connector of the o2 sensor (Fig.5). Fig.5 12. Connect the Rapid Bike connectors in-line with the stock connectors (Fig.6). Fig.6 Issued by: PM approved by DG Rev.07 date 01/03/16...
- Page 6 ___________________________ Installing instructions ______________________________ _________________________ Feeding voltage section _________________________ 13. SHIVER: Locate and disconnect the white 3 pin connector on the back of the underseat compartment (Fig.7A). DORSODURO: Locate and disconnect the white 6 pin connector on the right side of the underseat compartment (Fig.7B) Fig.7A Fig.7B...
- Page 7 ___________________________ Installing instructions ______________________________ 14. Connect the Rapid Bike connectors in-line with the stock connectors. Use the provided adapter to perform the connection on Dorsoduro model (Fig.8). Fig.8 15. Connect the eyelet from the RAPID BIKE wiring harness to the negative pole of the battery (Fig.9).
- Page 8 ___________________________ Installing instructions ______________________________ _____________________________ Final Section_____________________________ 14. Connect the Rapid Bike wiring harness to the RAPID BIKE module. 15. Check the correct connection of all the connectors. 16. Fix the RAPID BIKE control unit to the motorbike in the underseat compartment. 17.
- Page 9 ___________________________ Installing instructions ______________________________ Notes: 1. Locate and disconnect the black six-way connector on the front-right side of the motorbike. 2. Connect the black six-way connector of the RAPID BIKE wiring harness to the stock connector. Issued by: PM approved by DG Rev.07 date 01/03/16 pag.
- Page 10 ___________________________ Installing instructions ______________________________ Notes: ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… Issued by: PM approved by DG Rev.07 date 01/03/16 pag. 10/12...
- Page 11 ___________________________ Installing instructions ______________________________ Notes: ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… Issued by: PM approved by DG Rev.07 date 01/03/16 pag. 11/12...
- Page 12 ___________________________ Installing instructions ______________________________ Issued by: PM approved by DG Rev.07 date 01/03/16 pag. 12/12...
Need help?
Do you have a question about the RapidBike EVO and is the answer not in the manual?
Questions and answers