Swisscom Internet-Box standard Fibre-Optic Kit Setup

Start
Internet-Box fibre-optic kit setup
Convert your
existing
Internet-Box
Continue you with step 1 if your router is the same as the one on the
to fibre optic
installation overview.
technology
Optionally:
Wireless HD-Phone connections
You can connect the HD-Phones from Swisscom wirelessly with the
Internet-Box. For information about HD-Phones from Swisscom please
visit www.swisscom.ch/hdphones
Connect your telephone.
(This only applies if you are a fixed network subscriber.)
www.swisscom.ch/internetbox-help
Swisscom (Switzerland) Ltd
Contact Center
CH-3050 Bern
www.swisscom.ch
0800 800 800
Now only connect your telephone and / or fax machine to the
Internet-Box (phone 1 and 2) – and not the telephone socket as before.
Use the black telephone adapter if necessary.
If your router looks like this,
follow the instructions on the
reverse.
Internet-Box standard
11
You are now surfing with fibre optic technology!
HD-Phone
> Internet-Box: press + button
> Start your HD-Phone and select connection mode
N.B. Please note that conventional DECT cordless phones
cannot be wirelessly connected to the DECT base station
10 integrated into the Internet-Box, but must be directly inserted
into the «phone 1» or «phone 2» ports.
9
The package includes:
1
Fibre optic module
Fibre optic cable
Telephone adapter
Follow the steps below to convert your existing Internet-Box to fibre optic
technology.
Installation overview
Internet-Box plus
Remove your old Internet / telephony
8
installations (if any).
You can return old devices to Swisscom for recycling free of charge.
A return label is included on the delivery slip.
Switch off the Internet-Box and
2
remove the DSL cable.
HD-Phone
Connect your computer and open your
7
Internet browser.
Connect the computer per Ethernet cable or to your existing WLAN. Open
www.bluewin.ch in the Internet browser and, if the registration page is
displayed, complete all compulsory fields step by step. If the page is not
displayed, continue with step 8.
Insert the fibre optic module.
3
Push in the fibre optic module (clip facing up) into the «fibre» insert until it
clicks in.
4
Connect the new fibre optic cable to
the Internet-Box.
Remove the protection caps and connect the blue end of the cable into the
Internet-Box.
The cable is sensitive, so please do not touch it at either end!
5
Connect the fibre optic cable to the
fibre optic socket.
Open the slot on the fibre optic socket that we specified to you per letter.
This is generally slot 2, rarely slot 1. Remove the protective cap and connect
the green cable end.
6
Switch on the Internet-Box and wait
5 minutes.
After 5 minutes continue with step 7.