Table of Contents
Advertisement
Troubleshooting
If the FileHub fails to function as expected, check the list of common
problems below before consulting a RAVPower representative.
Q: Why can't I connect to the FileHub after changing the SSID password?
A: Please forget the password of the FileHub on your phone
80. If
this doesn't work, please reset the FileHub for a try
105.
Q: Why does the network speed decrease in the Bridge Mode?
A: This is because it uses the same radio/frequency (2.4GHz) to accept
incoming and outgoing packets from clients as it does to forward those
packets on to the next Wi-Fi router and accept replies. So effectively you
get half the bandwidth, as each packet must go over the air twice - from
the client to the FileHub, then from the FileHub to the Wi-Fi router. This
is the industry standard with almost all routers with a bridge mode. For
those who constantly use media streaming or real-time network gaming,
we instead recommend AP Mode to expand the wireless network with
less impact to peak performance.
Q: Why I can't get any Internet from the FileHub?
A: Please check if your FileHub is connected to a wired or wireless
network
31.
Please note that the FileHub can create its own LAN but without full
113
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the RP-WD03 and is the answer not in the manual?
Questions and answers