Fig. 13: Ce Foot Contact Surface; Fig. 14: Te Foot: Handling Of Cup Spring Contact Surface / Foot Contact Surface - ABB A175-M62 Operation Manual
Axial turbochargers for the largest medium-speed engines
Hide thumbs
Also See for A175-M62:
- Operation manual (148 pages) ,
- Original operation manual (138 pages) ,
- Operation manual (144 pages)
Table of Contents
Advertisement
Operation Manual / 4 Product description / A100-M axial
2 Removal and installation / 2.3 Installing the turbocharger
Fixing clamping nuts
Fig. 13: CE foot contact surface
Tighten clamping nuts on compressor end (CE) (see
u
Fig. 14: TE foot: Handling of cup spring contact surface / foot contact surface
Coat the contact surface (F) for the cup springs (X)
u
→14)
at the foot of the turbine end (TE) with high-temperature grease.
Tighten clamping nuts on turbine end (TE) (see
u
© Copyright 2017 ABB. All rights reserved.
Tightening the clamping nut
(see Table 3: Foot bolt dimensions
Tightening the clamping nut
HZTL4033_DE
→16).
→16).
Revision B
December 2017
Advertisement
Chapters
Table of Contents
