Legal Disclaimer; Mounting The Odus; Mounting To Pole Diameters 25Mm (1") To 50Mm (2") - Motorola PTP 300 Series User Manual

Motowi4 series

Hide thumbs Also See for PTP 300 Series:

Table of Contents

7.5 Legal Disclaimer

IN NO EVENT SHALL MOTOROLA, INC. BE LIABLE FOR ANY INJURY TO ANY PERSONS

OR ANY DAMAGE CAUSED DURING THE INSTALLATION OF THE MOTOROLA PTP 300

SERIES PRODUCT.

The ODU mounting bracket is designed to ease installation by ﬁxing the bracket to a pole and

then bringing the ODU into position using a single bolt ﬁxing. The ODU should be mounted using

the following steps ensuring that the cable entry is at the bottom.

The ODU mounting bracket is designed to work with poles with diameters in the range 50mm (2")

to 75mm (3").

Pole diameters of 25mm (1") to 50mm (2") can be accommodated by inverting the back of the

bracket as shown in

When adjustment is complete tighten all bolts to 14Nm (11lb ft).

CAUTION: Do not over tighten the bolts as bracket failure may occur.

Installation

Step 1: Mount the

bracket to the pole.

Figure

14.

Figure 14 Mounting to pole diameters

25mm (1") to 50mm (2")

Step 2: Mate the unit to

the bracket together and

tighten the nut and bolt.

Table of Contents