Your Owner’s Instructions contain much valuable information on setting up and DANGER using your VCR. Please take the time to read them as they will help you take full advantage of your VCR’s features. The instructions in this manual are for models, SV-665B, SV-661B, SV-265B, SV-261B, SV-662B, SV-262B, SV-661I and SV-261I.
ASSETTE ECORDER Deciding How to Connect Your VCR... Connecting Your VCR to the TV using the Coaxial Cable and SCART cable... Connecting Your VCR to the Satellite receiver or Other Equipment ... Connecting the Audio Output Cable (SV-665B/SV-661B/SV-662B/SV-661I Only)... Plug & Auto Set Up...
Safety Instructions The following illustrations represent precautions. The lightning bolt is a warning sign alerting you to dangerous voltage inside the product. DO NOT OPEN THE VCR. Refer to service personnel. 40°C 5°C Do NOT expose the VCR to Do NOT expose the VCR to extreme temperature condi- direct sunlight.
Audio RCA Audio Hi-Fi system OUT/SORTIE AUDIO Whenever you connect an audio or video system to your VCR, ensure that all elements are switched off. Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions.
After making this connection, you must preset the station received through the satellite tuner. RF output channel of the satellite receiver should be adjusted away from channel 60, which is used by the VCR, e.g. re-adjust to channel 65.
So if you want to change this fixed one, you can change it by Presetting the Stations Automatically in OSD “ Auto Set Up” menu. (see page 18) (SV-665B/SV-661B/ You must tune your television for the VCR only if you are not using a Scart cable A message appears. (STOP) on...
Setting the VCR Output Channel Your VCR output channel may need to be changed if the pictures suffer from interference or if your TV cannot find the pictures. Also, you can change the VCR output channel to adjust the frequency in which information is displayed on the screen.
Presetting the Stations Automatically You do not need to preset the stations if you have already set them automatically (see Plug & Auto Set Up on page 14). Your VCR contains a built-in tuner used to receive television INSTALL PROG OPTIONS INSTALL broadcasts.
Press the OK button to select this option. Result: INSTALL AUTO SET UP Press the corresponding MANUAL SET UP option is selected. VCR OUTPUT CH :CH60 Press the Result: END: MENU Press the corresponding TV station (PR) is selected. Press the CLR/RST button.
USER SET NICAM ECO. MODE :OFF Press the OK button to select this option. END: MENU Press the corresponding SELECT option is selected. (SV-265B/SV-261B/SV-262B/SV-261I) Press the correct cassette length is displayed. PTIONS TAPE SELECT :E180 COLOUR SYSTEM :AUTO ECO. MODE :OFF Press MENU twice to exit the menu.
Switch on the television. INPUT INPUT To monitor the programme being recorded, select the television REPEAT channel reserved for use with your VCR (or the AV input if used). REPEAT DISPLA DISP./ Insert the cassette on which the programme is to be recorded,...
Using the VIDEOPLUS+ Feature (SV-665B/SV-265B Only) Before presetting your VCR: Switch on both the television and your VCR Check that the date and time are correct Insert the cassette on which the programme is to be recorded (safety tab intact)
Using the Timer Programming Feature The Timer Programming feature allows you to preset the VCR to (SV-665B/SV-265B) record a programme up to one month before that programme is to be broadcast. Up to six programmes can be preset. ** TIMER METHOD ** Before presetting a recording, check that the date and time are correct.
If you do not press a button within ten seconds, the PICTURE On completion, press the MENU button again. Intelligent Picture Control SV-661I/SV-265B/ SV-261B/SV-262B/SV-261I Only) During playback, press the IPC button. Result: Press the option When Intelligent Picture Control mode is of the image is adjusted automatically.
AUTO Set when you use a wide TV. The VCR automatically detects if programmes being played back or recorded are in normal or Wide Screen format. The VCR always plays back and records in 16:9 Wide Screen format.
If you press and HOLD down the search at 9 times the normal speed. Releasing the return the VCR to search at 5 times the normal speed. To return to normal playback mode, press the Whilst in Picture Search mode, if you press the the VCR will enter normal Fast Forward mode.
To search for a specific index, press INDEX. Press the where your desired programme is located. When an Index mark is found the VCR will playback the tape for 5 seconds, after which it will continue searching for the next Index mark.
VIDEOPLUS+ EXTEND (SV-665B/SV-265B Only) To prevent delays or over-runs the VCR has a function called Videoplus EXTEND allowing you to extend the recording time by up to 60 minutes. PROG OPTIONS INSTALL Only use if PDC is not available or set to OFF.
Your VCR must be connected as usual to the television (see page 12 for further details) Using the TV Buttons on the Remote Control (V-665B Only) Your VCR remote control will work with Samsung televisions and compatible brands. To determine whether your television is compatible, follow the instructions ll button to start playback.
Auto Power Off (SV-665B/SV-265B) The Auto Power Off feature automatically turns off your VCR if no signal is received and you do not press any button for the selected time. BONUS VIDEOPLUS EXTEND :OFF AUTO POWER OFF :OFF Press MENU on the remote control.
Problems and Solutions Before contacting the Samsung after-sales service, perform the following simple checks. Problem No power Check that the power plug is connected to a wall outlet. Have you pressed the VCR STANDBY/ON (STANDBY/ON) button? You cannot insert a video cassette A video cassette can only be inserted with the window side up and the safety tab facing you.