Firmware Update - zortrax M200 Plus User Manual

Firmware Update

If your printer is connected to the Internet using either Wi-Fi or an Ethernet cable, it
automatically checks for available firmware updates. Every time you turn on the printer,
you will see the launcher displaying information about the current firmware version and
whether the firwmare can be updated. Once you get this notification, follow the instruc-
tions displayed on the screen.
You can go back to the launcher at any point of working with the M200 Plus and update
the firmware. Open the Settings menu and select Go to launcher.
If you have decided not to connect the printer to the Internet, check https://support.zor-
trax.com/downloads/ regularly for updates. To update the firmware, transfer the Update.
zar file to a USB flash drive and plug it into the port at the front of the device. To start the
installation, select Refresh.
©2018, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
30
document are registered trademarks of Zortrax and are subject to legal protection.