The identification plate located on the inside of the appliance certifies the origin where the product was manufactured and the country for which it is intended. If you see any exception to this rule, please contact your nearest Saunier Duval dealer. Thank you in advance for your assistance.
The OPALIS 6 models are fitted with a flue safety device that shuts off the appliance in the event of The water heaters are gas-fired appliances pro- a problem with the flue system.
: 8,5 Kg Various size spouts are available. Please contact your supplier. Gross weight : 9 Diagram 1.1 Diagram 1.2 OPALIS 5 OPALIS 6 Ø 83 618 x 280 x 180 482 x 280 x 180 TECHNICAL DATA Model Input...
Page 5
TECHNICAL DATA OPALIS 6 Output [P] ............... 9,65 (32905 Btu/h) Efficiency ................Minimum flow rate ................l/min (0.6 g/min) Maximum flow rate ................l/min (1.3 g/min) Minimum water pressure [pw] ..............(9 lb/in Maximum water pressure ( ) [pw] ..............
INSTALLATION REQUIREMENTS This appliance must be installed in accordance Specific conditions for the Opalis 5 with the latest issue of the following : Under no circumstances must a flueless water BS 5440 : Part 1 flues. Flues and air supply for gas heater be installed in a bathroom, shower room, appliances of rated input not exceeding 60 kW.
WATER HEATER INSTALLATION LOCATION Diagram 3 Avoid installing the appliance in a room in which the air is corrosive or dusty. Avoid installing the appliance in close proximity to a cooking appliance. crochet de Position The recommended height to install the appliance of support hook fixation is 1.5 m (59 in) from the viewing window to the...
COMMISSIONING & LIGHTING - OPALIS 6 Commissionning Diagram 5 With the front casing removed, fit the temperature selector knob where applicable. OPALIS 6 On tap models, fit the hot tap handle (red) to the left hand spindle and the cold tap handle (blue) to the right hand spindle.
COMMISSIONING & LIGHTING - OPALIS 5 Commissionning Diagram 7 With the front casing removed, fit the tempera- ture selector knob where applicable. OPALIS 5 On tap models, fit the hot tap handle (red) to the left hand spindle and the cold tap handle (blue) to the right hand spindle.
SERVICING / MAINTENANCE - OPALIS 6 Diagram 10 1 - Pilot tube 2 - Temperature selector 3 - Pilot tube clip 4 - Pilot injector To ensure the continued efficient and safe operation of the water heater, it is recommended that it is checked and serviced annually.
Ever anxious to improve the quality of its appliances, the Saunier Duval/ hot water/ heater company reserves the right to modify the latter without prior notice. The technical information contained in our documents are given for guidance only and are without liability.
Need help?
Do you have a question about the OPALIS 6 and is the answer not in the manual?
Questions and answers