Remote Hmi (Browser) Firmware Update - ProMinent DULCOMETER Aegis-II Assembly And Operating Instructions Manual

13.4 Remote HMI (Browser) Firmware Update

This firmware should be updated if a browser connection does not display correctly or if recommended by a
ProMinent factory technician. This program is related to how your PC, tablet or Smartphone displays the controller
information on your screen.
1. Download and the latest version of the Remote HMI file from our web site.
Click on the link: http://prominent.us/products/Controllers_Monitors/Cooling_Tower_Boiler_Controllers/AEGIS_II
2. Select the Info/downloads tab and choose the latest Site firmware (Remote HMI
Updates). Press the Download button
3. Find the Zip file in your Downloads directory. Unzip the files from this folder and save them in the folder of your
choice.
4. Copy the "site" folder
5. Insert a USB thumb-drive into your computer
6. Paste the "site" folder to the root of the USB thumb-drive
7. Eject your USB drive before you remove it from your computer, then insert it into the controller's USB port.
(See figure 66 in section 13.1 Capturing Data)
8. The OLED screen should display the message: "USB DRIVE ACTIVE". If the controller does not display this
message, then remove the USB drive and try again.
10. Press F2 (UPDATE)
11. Press F2 (SITE)
12. Wait until the controller tells you to remove the USB drive
13. Open a web browser then go to http://10.10.6.106 (or whatever the IP Address of your controller is)
For more information on using a browser, consult the Aegis II Browser manual.
Page 115 of 121