Setting Dolby Pro Logic Llx Effect; Setting Neo:6 Mode - Samsung HT-AS720S Instruction Manual

Setting Dolby Pro Logic llx effect

This function works only in Dolby PRO LOGIC IIx MUSIC Mode.
1
Press SETUP/MENU button, and then press the ENTER
button.
•
2
Press
and then press the ENTER button.
3
Press
•
4
Press
Dolby Pro Logic llx effect you
want.
To exit setup mode
• Wait for about 5 seconds or press SETUP/MENU button.
"SETUP OFF" appears on the display and Setup Mode is exited.
Using the
1 Press
2 Press
Each time you press this button, C-WIDTH ➝ DIMENSION ➝ PANORAMA
•
will be selected in turn.
3 Press ...† button to select Dolby Pro Logic IIx effect you want.
C-WIDTH : You can set from 0 to 7.
•
• DIMENSION : You can set from -7 to +7.
PANORAMA : You can set it ON or OFF.
•
Dolby Pro Logic llx effect
• C-WIDTH : This sets the width of the center image. The higher the setting, the
DIMENSION : Incrementally adjusts the sound field (DSP)from the front or surround.
•
• PANORAMA : This mode extends the front stereo image to include the surround
30
"SETUP MODE" appears on the display and goes into Setup Mode.
button to select the " MODE",
button.
Each time you press this button,
C-WIDTH ➝ DIMENSION ➝
PANORAMA will be selected in turn.
...†
button to set the
EFFECT button
MODE button to select 'MUSIC' Mode.
EFFECT button.
less sound comes from the center speaker.
speakers for an exciting "wraparound" effect with side wall imaging.

Setting NEO:6 mode

You can play back 2 channel sound over 6.1 channels when enjoying music or a movie.
REMOTE CONTROL
Press NEO:6 MODE button.
Each time you press this button, MUSIC ➝ CINEMA will be selected in turn.
•
MAIN UNIT
1
Press SURROUND button briefly to select "NEO:6" mode.
Each time you press this button, DPLIIx ➝ NEO:6 ➝ SFE ➝ STEREO will
•
be selected in turn.
2
Press SELECT(
Each time you press this button, MUSIC ➝ CINEMA will be selected in turn.
•
To set the height of the center sound image
If your TV (or screen) is installed high on a wall, you can raise the center
sound image of the front and center speakers to compensate.
1
Press SETUP/MENU button, and then press the ENTER button.
• "SETUP MODE" appears on the display and goes into Setup Mode.
2
Press button to select the "NEO:6 MODE", and then
press the ENTER button.
• "CEN -- IMG : 2" appears on the display.
3
Press ...† button to set the sound image you want.
You can set the sound image from 0 to 5.
•
This parameter adjusts the height of the center image through the front and
•
center speakers. "0" is the lowest while "5" is the highest.
To exit setup mode
• Wait for about 5 seconds or press SETUP/MENU button.
"SETUP OFF" appears on the display and Setup Mode is exited.
NEO : 6 Mode
This mode decodes 2 channel signals to a high precision digital matrix decoder.
for 6.1 channel sound.
MUSIC : NEO:6 MUSIC mode is optimized for music playback
•
CINEMA : NEO:6 CINEMA mode is optimized for movie playback.
•
• NEO:6 mode cannot be used with DTS and Dolby Digital multi channel signals.
Pro Logic works only for PCM audio signals with sampling frequencies of
•
32KHz, 44KHz or 48KHz.
ENG
, ) button.
31